Screen is difficult to read outdoors
Increase suitable backlight brightness, add optical bonding and select AR/AG cover glass to improve contrast and control reflection.
Off-Highway & Smart Mobility Displays
TFT & HMI Displays for Working Vehicles
Custom display modules and integrated HMI assemblies for agricultural machinery, trucks, harvesters, construction equipment and light mobility systems.
Sunlight ReadableWide TemperatureWater & Glove TouchCustom Interfaces
Application-Focused Display Formats
Different machines need different levels of display integration.
We configure the TFT or HMI around where it is installed, how the operator uses it and what controller is already inside the equipment.
TRACTORS & HARVESTERS
10.4-inch High-Brightness TFT
Large viewing area for machine status, camera views and working data, with sunlight-readable and wide-temperature options.
TRUCKS & COMMERCIAL VEHICLES
7.84-inch Bar TFT
A wide information format for fleet terminals, camera systems, auxiliary dashboards and aftermarket control equipment.
CONSTRUCTION & UTILITY MACHINERY
2.86-inch Compact TFT
A narrow high-resolution format with custom FPC and connector options for compact control and status panels.
LIGHT MOBILITY
Outdoor Dashboard Display
Sunlight readability, weather-aware cover-lens integration and compact installation for e-bikes and utility vehicles.
Practical Engineering Responses
Common field problems—and what we change in the display.
The design starts from the machine’s actual operating conditions and installation limits.
Touch fails with gloves or water
Tune the CTP firmware, adjust the sensor stack and combine it with a sealed front structure for the required operating mode.
Module loosens under vibration
Review FPC bend position, connector retention, mounting points, cushioning and the support structure around the display.
Standard module does not fit the controller
Adjust the interface, FPC, connector, cable direction or add a controller board to match the customer’s hardware and operating system.
Information Needed for Selection
Start with the machine and its working environment.
A few practical details are enough for us to recommend a TFT module, bonded touch assembly or integrated HMI.
Where will it be mounted?
Open cab, enclosed cab, dashboard, control arm or external panel—and the available opening and depth.
What will it face?
Sunlight, temperature range, rain, dust, cleaning, vibration and whether gloves are used.
What must it connect to?
Required interface, voltage, connector, cable direction, controller board, operating system and available I/O.
What must the operator see?
Screen size, resolution, viewing distance, graphical content, brightness and day/night dimming needs.
How will it be assembled?
Cover-lens outline, mounting points, enclosure material, sealing concept and front-surface appearance.
Module, touch assembly or HMI?
Choose a custom TFT, TFT + CTP bonded assembly, open-frame monitor or controller-integrated HMI.
For simple aftermarket and off-highway projects, the target should be clear and achievable: reliable visibility, usable touch, stable installation and correct electrical connection in the customer’s equipment.
Need a display for a working vehicle?
Share the machine type, installation size, sunlight condition, temperature range, interface and preferred delivery level.
