Products

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The CTP-VX156B5544-GG is a 15.6-inch capacitive touch panel in G+G construction, built for laptop-class and portable equipment rather than fixed kiosks. Note for buyers: at 15.6 inches it is inspected in the 10.1–17 inch cosmetic tier, which is about 25% stricter than the tier used for 21.5-inch and larger panels. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms, and it draws just 12–14.5 mA — low enough for battery-powered devices. Suited to portable terminals, medical carts, industrial laptops and handheld HMI.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.

The CTP-VX116B5741-GG is an 11.6-inch capacitive touch panel in G+G construction, sized for 1366x768 displays. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms. Suited to portable terminals, industrial tablets, POS, medical devices and vehicle displays.

The CTP-VX104B5747-GG is a 10.4-inch capacitive touch panel in G+G construction, sized for the 1024x768 industrial panels that a great deal of equipment was built around — so it is usually bought as a replacement rather than a new design. At 10.4 inches it sits just past the 10.1-inch boundary in the inspection standard, making it one cosmetic tier more permissive than sub-10-inch panels. Transmittance is ≥85% with ≥6H hardness, response ≤12 ms. Suited to industrial HMI, medical devices, CNC controls and legacy upgrades.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.