Home > Products > TFT LCD Module

Custom TFT LCD Solutions for Industrial, Medical, Automotive and Smart Applications

View as  
 
3.5 Inch 320x240 TFT LCD Module with Resistive Touch 24-Bit RGB - VXT350MLH-03P

3.5 Inch 320x240 TFT LCD Module with Resistive Touch 24-Bit RGB - VXT350MLH-03P

The VXT350MLH-03P is a 3.5-inch 320 x 240 TFT LCD module with a 4-wire resistive touch panel, and resistive sensing works with gloves, wet hands or a stylus. The brightness 200 cd/m2 minimum with the touch panel fitted, contrast 300 minimum and NTSC 50% minimum - and because brightness is also published without the touch panel at 300 cd/m2
Read MoreSend Inquiry
3.5 Inch 320x240 TFT LCD Module with Capacitive Touch 24-Bit RGB - VXT350MHLS-03C

3.5 Inch 320x240 TFT LCD Module with Capacitive Touch 24-Bit RGB - VXT350MHLS-03C

Victronix 3.5 inch Capacitive Touch TFT Module,its IPS technology provides consistent color and clarity across wide 80-degree viewing angle in all directions (3/6/9/12 o'clock), 250 cd/m² typical brightness, 16.7M colors and a high typical contrast ratio of 800:1. Secondly, it supports both 24-bit parallel RGB (6-8MHz DCLK) and 8-bit serial RGB (15-21MHz DCLK) interfaces, It features a capacitive touch interface with an on-board FT5346 CTP controller, enabling responsive touch input through a standard I²C connection (SCL, SDA, INT, RESET). This 3.5 inch LCD display by Victronix is perfect for industrial HMIs, medical devices, portable instrumentation, smart home controllers, kiosks, and any application requiring a reliable, high-quality touch display interface in tight spaces.
Read MoreSend Inquiry
3.5 Inch 320x240 TFT LCD Module with Resistive Touch 18-Bit RGB - VXT350LQZ-01P

3.5 Inch 320x240 TFT LCD Module with Resistive Touch 18-Bit RGB - VXT350LQZ-01P

The VXT350LQZ-01P is a 3.5-inch 320 x 240 QVGA TFT LCD module with a 4-wire resistive touch panel, and the touch specification is the reason to look at it. Section 6 publishes what almost nothing in this size does: linearity of +/-1.5% after environmental and life testing, terminal resistance per axis, insulation resistance of 20 megohms minimum, response time under 10 ms, light transparency of 78% minimum, operation force of 80 gf typical, surface hardness of 3H minimum, 100,000 pen sliding cycles and 1,000,000 hitting cycles - with the test conditions for each. Two other figures are unusually trustworthy. Brightness carries both a floor and a ceiling, 280 minimum and 420 maximum around the 350 typical, so you can see the production spread as well as the worst case.The viewing angles are the narrowest in our range at 25 degrees typical on one horizontal side and 45 everywhere else, and while the specification states a 6 o'clock viewing direction, it is the horizontal pair that is asymmetric rather than the vertical one - so confirm the orientation with us and expect a narrow cone.
Read MoreSend Inquiry
3.5 Inch 480x640 Portrait Transflective TFT LCD Module 18-Bit RGB + SPI - VXT350FLVH-01

3.5 Inch 480x640 Portrait Transflective TFT LCD Module 18-Bit RGB + SPI - VXT350FLVH-01

This Victronix 3.5'' 480x640 transflective IPS TFT Module is a high-performance 3.5 inch TFT LCD module featuring advanced Transflective IPS technology. This module delivers exceptional readability both indoors and under direct sunlight, making it ideal for industrial controls, portable instrumentation, and outdoor equipment.
Read MoreSend Inquiry
3.5 Inch 320x240 TFT LCD Module 24-Bit RGB + SPI - VXT350CQH-05

3.5 Inch 320x240 TFT LCD Module 24-Bit RGB + SPI - VXT350CQH-05

The VXT350CQH-05 is a 3.5-inch 320 x 240 QVGA TFT LCD module, and two things about it are worth knowing before anything else. It is 3.2 mm thick, the thinnest module in this range on the same 76.90 x 63.90 mm footprint, and it carries no touch panel - so if your product has a separate touch solution, or none, you are not paying for one. The backlight is confirmed twice over: the mechanical drawing shows the LED circuit as six dies in one string from LEDA to LEDK, and 19.2 V over six gives exactly 3.20 V per LED, while the stated 0.384 W matches 19.2 V x 20 mA exactly. Response time is also better documented than usual, with both Ton and Toff published and floors on each - 15 and 30 ms on, 35 and 50 ms off - and contrast carries a 200 minimum. Two things need settling before you commit. This is a TN panel: the specification states a 12 o'clock viewing direction with grey-scale inversion at 6 o'clock, and vertical angles of 50 and 60 degrees, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, ask us about a panel with no preferred direction. And the timing chapter runs three pages and is published entirely as diagrams, with a note saying the sequences are for reference only and referring you to the HX8238D data sheet, so there is nothing in this document to configure a controller from.
Read MoreSend Inquiry
3.5 Inch 320x480 Portrait TFT LCD Module 1000 Nits 18-Bit RGB + SPI - VXT350CHH-24

3.5 Inch 320x480 Portrait TFT LCD Module 1000 Nits 18-Bit RGB + SPI - VXT350CHH-24

This Victronix 3.5 inch 320x480 sunlight readable TFT Module is a high-performance 3.5 inch IPS LCD module designed by Victronix to deliver exceptional clarity and reliability in challenging applications. This 3.5 inch TFT Module features a sharp 320×480 resolution and powered by the HX8357D driver to provide outstanding visual performance essential for industrial control systems. It is widely suitable for Industrial Control Systems & HMI, Video Door Phones & Security Systems, Smart Home Interfaces, GPS Navigation Devices, Camcorders & Digital Cameras, and Industrial Equipment & Instrumentation. As a professional TFT LCD manufacturer and supplier in China, this Victronix 3.5 inch TFT module strictly complies with ROHS environmental standards, ensuring excellent application performance. We offer a customized service to meet the needs of our customers.
Read MoreSend Inquiry

Why Source TFT LCD Modules from Victronix

Victronix has been designing and manufacturing TFT LCD modules for 20 years, supplying standard and custom displays to customers in industrial control, medical, automotive and smart home markets.


Wide Range, One Supplier


  • Sizes from 0.96inch to 32inch
  • Resolutions from QVGA to FHD
  • Interfaces: SPI, RGB, LVDS, MIPI DSI, HDMI with converter board
  • Panel options: TN, IPS, high brightness, transflective, bar type, round

Customization Built Around Your Project

  • Custom FPC length, pinout and connector
  • Resistive or capacitive touch panel integration
  • Cover glass with custom printing, thickness and surface treatment
  • Brightness upgrade and wide temperature design
  • Interface conversion boards

Quality You Can Verify

ISO 9001, ISO 14001 and IATF 16949 management system certifications with a TFT LCD module

Every module is tested for brightness, contrast, viewing angle and response time before shipment, and validated against thermal shock, humidity and vibration requirements. Our management systems are certified to ISO 9001, ISO 14001 and IATF 16949 within the scope of the applicable certificates.

From Sample to Volume

Standard samples ship in 15 working days. Engineering support covers datasheet, 3D drawing, interface definition and driver reference code. Low MOQ for prototypes, scalable capacity for volume production.




X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept