Custom TFT LCD Solutions for Industrial, Medical, Automotive and Smart Applications

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. We offer a customized service to meet the needs of our customers. This Victronix 10.4 inch 800×600 TFT Module is a high-performance 10.4 inch 800x600 TFT Module engineered for demanding environments. Featuring an 800×600 RGB resolution and supporting 262K colors, this display delivers crisp, vibrant visuals with wide viewing angles (70° at 3/6/9 o’clock, 60° at 12 o’clock).

The VXT101YIA-19C is a 10.1-inch TFT LCD module with 800 x 1280 pixels, and the shape is what sets it apart: this is the only portrait panel in our 10.1-inch range, where the others are 1280 x 800 landscape. Its active area of 135.36 x 216.58 mm is taller than it is wide by an exact 1.6 to 1, so content stacks vertically the way a phone screen does — readings, lists and status panels one row at a time — and it drops into enclosures cut for portrait without rotating the design. Touch is a ten-point projected capacitive panel on an ILI2511 controller, specified at 6H surface hardness, 85% transparency and accuracy of ±1.5 mm at centre rising to ±2.5 mm at the edges, which is the pair of numbers you actually need when deciding how far from the bezel a button may sit. The display runs on an ILI9881C over four MIPI lanes, the pixels are square to within 0.002% so circles need no correction, and contrast carries a stated 800 minimum. One feature is worth calling out: pin 27 outputs a CABC PWM signal, meaning the module can dim its own backlight from picture content rather than asking your processor to do it. We are equally direct about the limits. The operating range is -10 to +50 °C, narrower than most panels in our range and the first thing to check if your product sits in a hot enclosure or a vehicle. Brightness is 250 cd/m² typical with no stated minimum. Reliability runs six tests at 96 hours with no ESD, vibration, shock or MTBF, and the outline drawing is not dimensioned in this file.

The VXT101MBFH-01 is a 10.1-inch TFT LCD module with 1920 x 1200 pixels — WUXGA, the interface is dual-channel LVDS and contrast carries a stated 700 minimum against 800 typical. Brightness is 300 cd/m² typical with no stated minimum.

This Victronix 7 inch 800x1280 MIPI IPS TFT Module is a high-resolution 7-inch TFT LCD module engineered for demanding environments. Featuring an 800×(RGB) ×1280 pixel resolution and a crisp 150.72 × 94.2 mm active area, this display delivers exceptional visual clarity with a pixel density of 0.11775 mm. As a professional TFT module manufacturer and supplier in China, this Victronix 7 inch TFT Module is strictly compliant with the ROHS environmental standards to provide superior application performance. We offer a customized service to meet the needs of our customers.

The VXT620HWI-01 is a 6.2-inch TFT LCD module with 800 x 480 WVGA pixels on a 24-bit parallel RGB interface, and its most useful property is not a headline number but how the optical table is written. Luminance is given as 400 minimum, 500 typical and 600 maximum. Contrast carries a 480 minimum against 600 typical. Uniformity is 70% minimum. The module runs on an ILI6123H and ILI5480. Ratings are -20 to +70 °C, and reliability runs 240 hours per condition with 100 thermal shock cycles and 100 G mechanical shock.