Custom TFT LCD Solutions for Industrial, Medical, Automotive and Smart Applications
Products
- View as
5.0 Inch 800x480 Transflective Sunlight Readable TFT LCD Module - VXT500BWEF-01
The VXT500BWEF-01 is a 5.0-inch transflective TFT LCD module with 800x480 resolution — the only transflective panel in our range. It reads in sunlight by reflecting ambient light rather than outshining it, and the backlight can be dimmed or switched off outdoors, cutting power sharply. Brightness is 200 cd/m² with 60:1 contrast and a 15 ms response, the fastest we specify. The panel is a 6 o'clock type and the logic rail runs from 2.5 V to 3.3 V. Rated -20 to +70°C.
Read MoreSend Inquiry
1.74 Inch 240x128 Transflective Sunlight Readable TFT LCD Module - VXT174MYKH-01
The VXT174MYKH-01 is the smallest TFT module we make and the second transflective one in our range. At 1.74 inches in a 40.77 × 36.20 × 2.40 mm footprint, it is sized for something worn or carried — and transflective means the backlight can be switched off entirely in daylight, not merely dimmed. With a 3.0 V backlight needing no boost converter and a 60 KB frame buffer needing no external RAM, three power savings stack in one display. Rated -30 to +70°C.
Read MoreSend Inquiry
2.1 Inch Round 480x480 TFT LCD Module 1000:1 Contrast Low Power - VXT021MCSA-02
The VXT021MCSA-02 is a round TFT LCD module — the only round display in our range. Its 53.28 mm active diameter is 2.0976 inches, driven as a 480x480 array at 229 PPI. Built for smart watches: 230 µA sleep current, a 1.45 mm bezel, and 56.18 × 59.71 × 2.2 mm outline. Optics are specified with minimums, not just typicals — 530 cd/m² and 800:1 guaranteed, 600 and 1000:1 typical, with 80° viewing in all directions. Rated -20 to +70°C.
Read MoreSend Inquiry
3.9 Inch 480x128 Bar Type TFT LCD Module 1000 cd/m2 Sunlight Readable- VXT039BPSA-02
This 3.9-inch 480x128 TFT module is a bar display — a 3.75:1 stretched panel, the only one of its shape in our range — and the brightest module we make at 1000 cd/m² typical. A narrow strip suits a line of text, a row of readouts or a status bar, and 1000 cd/m² keeps it legible under strong light. It is transmissive with 16.7M colours, an ST7282A driver and an ALL viewing direction, so mounting can be decided mechanically. A full frame is only 120 KB, so most microcontrollers need no external RAM. Rated -20 to +70°C.
Read MoreSend Inquiry
3.5 Inch 240x320 Transflective Sunlight Readable TFT LCD Module - VXT350FPQI-01
The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.
Read MoreSend Inquiry
2.4 Inch 240x320 Transflective Sunlight Readable TFT LCD Module Anti-Glare - VXT240FBQS-01
The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.
Read MoreSend InquiryWhy Source TFT LCD Modules from Victronix
Victronix has been designing and manufacturing TFT LCD modules for 20 years, supplying standard and custom displays to customers in industrial control, medical, automotive and smart home markets.
Wide Range, One Supplier
- Sizes from 0.96inch to 32inch
- Resolutions from QVGA to FHD
- Interfaces: SPI, RGB, LVDS, MIPI DSI, HDMI with converter board
- Panel options: TN, IPS, high brightness, transflective, bar type, round
Customization Built Around Your Project
- Custom FPC length, pinout and connector
- Resistive or capacitive touch panel integration
- Cover glass with custom printing, thickness and surface treatment
- Brightness upgrade and wide temperature design
- Interface conversion boards
Quality You Can Verify
Every module is tested for brightness, contrast, viewing angle and response time before shipment, and validated against thermal shock, humidity and vibration requirements. Our management systems are certified to ISO 9001, ISO 14001 and IATF 16949 within the scope of the applicable certificates.
From Sample to Volume
Standard samples ship in 15 working days. Engineering support covers datasheet, 3D drawing, interface definition and driver reference code. Low MOQ for prototypes, scalable capacity for volume production.
