China 24 bit RGB TFT LCD module Manufacturer, Supplier, Factory

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

This Victronix 2 inch 240x320 SPI TFT Module is a compact 2.0 inch TFT LCD module engineered for embedded systems requiring reliable visual performance. Featuring a 240×320 RGB resolution on a 30.6 × 40.80 mm active area, this module delivers sharp, vibrant images with a pixel pitch of 0.1275 × 0.1275 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.95 inch 480x480 IPS TFT Module is a high-performance 3.95 inch TFT LCD module designed for demanding industrial applications. With a resolution of 480×480 and a compact active area of 71.856 × 70.176 mm, this display features 262K colors, 400 cd/m² typical brightness, and an 800:1 typical contrast ratio to deliver outstanding visual clarity.

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.

Victronix VXT430TWH-06P is a 4.3-inch TFT LCD module in portrait, and it carries a four-wire resistive touch panel. That combination is easy to overlook and hard to replace. A resistive panel responds to pressure rather than to a finger's conductivity, so it works with gloves, wet or oily hands, a stylus, or the tip of a tool, and it costs less than a capacitive stack — at the price of multi-touch, of 80% transmittance against the 85% a capacitive panel gives, and of a surface that takes a deliberate press. The shape suits a vertical column: the active area is taller than it is wide, so readings stack one per row, scrolling lists and status panels fit naturally, and a portrait enclosure needs no rework. The display itself runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, and 130,560 pixels need only 255 KB of frame buffer — small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Most optical figures carry a stated floor: 310 cd/m² minimum brightness, 400 minimum contrast, 80° minimum viewing angle. Two things want settling before you commit, and we set them out rather than leave them for bring-up: the specification writes the resolution as 480 × 272 while the geometry says the panel is 272 wide by 480 tall, and the driver IC is named two different ways in two different places.