China Optically bonded TFT display Manufacturer, Supplier, Factory

This Victronix Transflective Segment Color VA LCD Module is a sophisticated Color Vertical Alignment (VA) Liquid Crystal Display (LCD) Module, designed for applications requiring high segment count and advanced display capabilities. The module is centrally controlled by the UC2621c LCD driver IC, providing the necessary drive signals and interface management. This LCD module has 1/2D, 1/1B driver mode, and it operates from -30℃to +80℃. For industrial instruments, meters, handheld devices, smart home, bicycle, motor and e-car manufacturers.

The VXT400MCCA-01 is a round TFT module: 720 x 720 pixels in a square array with a circular active area of 101.52 mm diameter. It is the largest round module we offer — the others are 1.6 and 2.1 inches — and at 720 x 720 the highest resolution, at 180 PPI. The round shape suits products whose face is already circular: instrument gauges, thermostats, rotary controls, speaker and hub covers, and automotive clusters. Designers should know that the circle covers only 78.5% of the pixel array, so the four corners are invisible and content must stay within about 45 mm of centre. It runs MIPI DSI with four data lanes, and the capacitive touch interface sits on the same 30-pin connector — interrupt, I2C, reset and two dedicated supply pins — so one flex and one socket cover display and touch. Separate 1.8 V and 3.3 V rails mean 1.8 V host logic connects directly with no level shifting. The module is 2.09 mm thick, the thinnest in this size class.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.

The Victronix VXT121BIHA-01 is a 12.1-inch WXGA (1280 x RGB x 800) IPS TFT LCD module designed for equipment that must stay readable in bright ambient light and keep running in harsh environments. Its IPS cell delivers stable color and contrast from every viewing direction with no grayscale inversion, while the 800 cd/m² high-brightness backlight keeps the screen legible under indirect and direct sunlight. The module fits industrial HMI panels, outdoor kiosks, EV charging piles, marine instruments, medical devices and agricultural machinery. Touch panels, cover glass, optical bonding and interface converter boards are available on request.

The VXT215AUOP-01C is a 21.5 inch HMI display module with Full HD resolution, 10-point capacitive touch and 250 cd/m² brightness. Dual-channel LVDS, USB touch and an aluminum-profile housing support integration into industrial equipment.