China 1000 nit TFT display Manufacturer, Supplier, Factory

This Victronix 10.1 inch 1280x800 HDMI TFT Module is a high-performance 10.1 inch TFT-LCD module for superior visual clarity and responsive interaction. Designed with a crisp 1280×800 resolution, this module delivers sharp imagery and clear text, ideal for industrial control panels, embedded systems, digital signage, and interactive kiosks.

Victronix VXT430TWH-06P is a 4.3-inch TFT LCD module in portrait, and it carries a four-wire resistive touch panel. That combination is easy to overlook and hard to replace. A resistive panel responds to pressure rather than to a finger's conductivity, so it works with gloves, wet or oily hands, a stylus, or the tip of a tool, and it costs less than a capacitive stack — at the price of multi-touch, of 80% transmittance against the 85% a capacitive panel gives, and of a surface that takes a deliberate press. The shape suits a vertical column: the active area is taller than it is wide, so readings stack one per row, scrolling lists and status panels fit naturally, and a portrait enclosure needs no rework. The display itself runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, and 130,560 pixels need only 255 KB of frame buffer — small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Most optical figures carry a stated floor: 310 cd/m² minimum brightness, 400 minimum contrast, 80° minimum viewing angle. Two things want settling before you commit, and we set them out rather than leave them for bring-up: the specification writes the resolution as 480 × 272 while the geometry says the panel is 272 wide by 480 tall, and the driver IC is named two different ways in two different places.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The Victronix VXT121BIHA-01 is a 12.1-inch WXGA (1280 x RGB x 800) IPS TFT LCD module designed for equipment that must stay readable in bright ambient light and keep running in harsh environments. Its IPS cell delivers stable color and contrast from every viewing direction with no grayscale inversion, while the 800 cd/m² high-brightness backlight keeps the screen legible under indirect and direct sunlight.

The VXT700IXN-06C3 combines a compact color display with 10-point capacitive touch and chemically strengthened cover glass. Its glass-on-glass touch structure, LVDS input and I2C touch connection suit space-conscious equipment interfaces.