China monochrome segment display Manufacturer, Supplier, Factory

Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

Victronix VXT350QHI-19: a 3.5 inch portrait TFT LCD module with 320x480 pixels and 262K colors over a 48.96 x 73.44 mm active area. All viewing direction with free grey-scale inversion and 80 degrees at 3, 6, 9 and 12 o'clock alike, so there is no wrong mounting orientation. RGB, MCU and SPI interfaces on one 50-pin FPC selected by IM0, IM1 and IM2, ILI9488 controller, VCI 2.8 V and IOVCC 1.8 V rails so 1.8 V logic drives it directly, 6-LED backlight, 2.25 mm thin, -20 to +70 C operating. For handheld instruments, portable monitors, smart home control panels, POS terminals, medical devices and industrial HMI.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. This Victronix 3.4 inch 800x800 Round IPS TFT Module features 800×(RGB)×800 pixel resolution within an 87.6×87.6 mm active area, supporting up to 16.7 million colors for rich, detailed imagery. Combining exceptional optical performance with robust reliability, this display solution delivers crisp visuals across extreme operating conditions.

The VXT430HWE-03-W is a 4.3-inch TFT module with 800 x 480 resolution — nearly three times the pixel count of the 480 x 272 panels that dominate this size — and an operating range of -30 to +85°C, the widest of any 4.3-inch module we offer. Storage goes to -40°C, the only module in the range rated that low. It is transmissive with an anti-glare polarizer and no touch panel. What stands out is how much is published: brightness of 640 minimum and 800 typical, contrast of 640 minimum and 800 typical, and logic current given for three screen contents — 73 mA on black, 102 mA on a single colour, 105 mA on white — rather than one vague number, which lets you size for the worst case and shows a dark interface genuinely saves power. The backlight is 16 LEDs at 1.024 W, and reliability covers ten tests including vibration at 10-55 Hz and mechanical shock at 60 G, with MTBF of 50,000 hours.

This Victronix 3.5 inch 320×240 QVGA IPS TFT Module with a 24-bit RGB interface. This TFT LCD module designed for robust and reliable operation in demanding industrial and embedded applications. Combining a sharp QVGA resolution with vibrant color performance and a wide viewing angle, this module delivers exceptional clarity for user interfaces, instrumentation, and control systems. As a professional manufacturer and supplier of TFT modules in China, this Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.