China oil and gas equipment TFT display Manufacturer, Supplier, Factory

This Victronix 3.5'' 480x640 transflective IPS TFT Module is a high-performance 3.5 inch TFT LCD module featuring advanced Transflective IPS technology. This module delivers exceptional readability both indoors and under direct sunlight, making it ideal for industrial controls, portable instrumentation, and outdoor equipment.

The VXT430MPIA-03 is a 4.3-inch TFT module with a 480 x 272 RGB panel, an ILI6485D driver and a 5S2P white LED backlight, and no touch panel. It is the display-only member of a pair: the VXT430MPIA-03C is the same module with five-point capacitive touch bonded on. Comparing the two gives something most suppliers cannot show — a measured figure for what adding touch actually costs. This module is rated 500 cd/m² and the touch version 400, on otherwise identical hardware: same panel, same driver, same backlight, same timing, and CIE colour coordinates matching to four decimal places. That difference is the touch panel, and it works out at about 20 per cent of your brightness. Beyond that it is a well-documented module: 800:1 contrast minimum, a published logic current of 22 mA giving a calculable total of about 0.67 W, and full timing tables for three operating modes.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.

This Victronix 4.3 inch 480x272 IPS TFT Module with CTP is a high-performance 4.3-inch TFT LCD module designed for demanding embedded and industrial applications. Combining a bright display with responsive multi-touch functionality, this module delivers exceptional visual clarity and user interaction in a compact form factor.

The VXT156HX1B-01 is a 15.6-inch VA TFT LCD combining high static contrast with a Full HD widescreen format. Wide viewing angles, an anti-glare surface and dual-channel LVDS support integration into indoor monitors and information terminals.