China parallel RGB TFT display Manufacturer, Supplier, Factory

Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.

This Victronix 2 inch 176x220 MCU TFT Module is a high-performance 2 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring a 176×220 RGB resolution with 0.18mm pixel pitch, this transmissive display delivers sharp 65K-color visuals ideal for portable medical devices, handheld instruments, and industrial HMIs. Its integrated backlight ensures consistent visibility in a wide range of lighting conditions. At the same time, the low power consumption prolongs battery life, making it an optimal choice for applications where efficiency and durability are paramount.

This Victronix 2.8 inch QVGA Capacitive Touch TFT Module is a high-performance 2.8 inch TFT LCD module featuring integrated capacitive touch control. Designed for embedded industrial applications, it combines a bright QVGA display, 5-point touch interface, and robust construction in a compact 59.5 × 83 × 3.85mm form factor. As a leading manufacturer and supplier of TFT modules in China, we are proud to offer the Victronix 2.8 inch TFT Module. This product not only complies fully with ROHS environmental standards, ensuring exceptional performance in various applications, but we also provide customized services to meet our customers' specific needs.

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

The CTP-VX116B5741-GG is an 11.6-inch capacitive touch panel in G+G construction, sized for 1366x768 displays. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms. Suited to portable terminals, industrial tablets, POS, medical devices and vehicle displays.