China touch panel for handheld terminal Manufacturer, Supplier, Factory

The VXT104BGH-01P is a 10.4-inch 800 x 600 SVGA TFT LCD module with a touch panel, driven over an LVDS interface on a 20-pin connector - four differential pairs, three data channels and one clock, with eight grounds and one between every pair. That is the industrial format: 480,000 pixels over a 212.20 x 158.40 mm active area, and a differential interface in place of the forty-pin parallel buses the smaller panels here need. Contrast carries a floor of 300 against 500 typical, NTSC a floor of 50 against 60, uniformity a floor of 75 per cent, and the rise and fall times are given separately at 10 ms each rather than squeezed into one row. The backlight is 36 LEDs, six in series and six strings in parallel, at 18.0 V and 120 mA for a derived 2.16 W.

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

This Victronix 7 inch 1024x600 MIPI IPS Touch TFT Module is a high-performance 7 inch TFT-LCD module with integrated capacitive touch panel (CTP). Engineered for reliability in demanding environments, this module combines a BOE-sourced IPS panel with 1024 × 600 resolution and 16.7 million colors for vivid visuals and wide viewing angles (80° at Cr≥10 at all directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. This Victronix 3.4 inch 800x800 Round IPS TFT Module features 800×(RGB)×800 pixel resolution within an 87.6×87.6 mm active area, supporting up to 16.7 million colors for rich, detailed imagery. Combining exceptional optical performance with robust reliability, this display solution delivers crisp visuals across extreme operating conditions.

The CTP-VX185A2132 is an 18.5-inch capacitive touch panel in G+G construction, and the only panel in our range with a USB interface — so it works the moment you plug it in, with the multi-touch HID driver already in Windows, Linux, macOS and Android. There is no I2C address to configure and no level shifting to worry about. Ten-point touch, a 409.8 x 230.4 mm active area matched to 1366x768, powered from 5 V. Built for kiosks, information displays, POS and interactive screens.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.