China transflective display for handheld device Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix Transflective Segment VA LCD Module provides reliable performance and versatile display capabilities, designed to meet particular customer integration requirements. It is suitable for automation equipment and digital measuring instruments, medical measuring devices (blood pressure monitors, infusion pumps, etc.), meters, handheld devices, car dashboards and car audio systems, audio systems, coffee makers, and microwaves.

This Victronix 7.84 inch 400x1280 Bar IPS TFT Module is a high-performance 7.84 inch TFT LCD module designed for industrial embedded systems. Featuring a 400(RGB) × 1280 resolution and a 59.40 × 190.08 mm active area, this module delivers sharp, distortion-free images with a wide 160° viewing angle (H/V). The 400 cd/m² typical brightness and 900:1 contrast ratio ensure vivid readability even in challenging lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix 7.84 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430CNH-07C is the capacitive-touch version of our 4.3-inch 480 x 272 panel, and the way it is put together is the reason to look at it. Touch is not squeezed onto the display FPC - it has its own 10-pin connector carrying I2C, reset and interrupt, so the 40-pin display bus stays clean and the two can be routed independently. The mechanical drawing documents the touch panel to a tenth of a millimetre, and the numbers show the touch view area sitting 0.40 mm outside the LCD active area on every side, so there is no dead band at the edges of the screen. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock, and vertical viewing angles of 45 degrees one way and 60 the other, so mounting orientation has a right answer - and if your product is handheld or portable and the orientation is not under your control, a panel with no preferred direction is the better buy.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.

The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.

The VXT270AUOP-01C is a 27 inch HMI display module with Full HD resolution, 10-point capacitive touch, 300 cd/m² brightness and a 3000:1 contrast ratio. Dual-channel LVDS and USB touch support integration into industrial control systems.