China 10.1 inch TFT for Android SBC Manufacturer, Supplier, Factory

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

This Victronix 4.6 inch Bar Type IPS TFT Module is a high-quality 4.6 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It combines IPS technology with a unique bar-shaped form factor, delivering exceptional 65° viewing angles in all directions, vivid color reproduction, and consistent image clarity essential for critical monitoring. As a professional manufacturer and supplier of TFT modules in China, Victronix 4.6 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 2 inch 176x220 MCU TFT Module is a high-performance 2 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring a 176×220 RGB resolution with 0.18mm pixel pitch, this transmissive display delivers sharp 65K-color visuals ideal for portable medical devices, handheld instruments, and industrial HMIs. Its integrated backlight ensures consistent visibility in a wide range of lighting conditions. At the same time, the low power consumption prolongs battery life, making it an optimal choice for applications where efficiency and durability are paramount.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.

The Victronix VXT700QAEW-01C arrives as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, a 0.70 mm cover lens and the display cell are built into one bonded stack — G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step, and no bonding process in your build. Luminance is 850 cd/m² typical with an 80/80/80/80 viewing angle, video comes in over 40-pin LVDS driven by EK79001HN and EK73215BCGA, and touch is managed by an ILI2130 controller. Rated -30°C to +85°C.