China 1920x1080 TFT LCD panel Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.9 inch 480x 128 Sunlight Readable TFT Module is a high-performance 3.9 inch TFT display module, engineered for exceptional clarity in demanding environments. Featuring a 480×128 resolution and advanced sunlight-readable technology, this display delivers sharp visibility even under direct sunlight with a typical luminance of 1000 cd/m².

The VXT320HQS-02P is a 3.2inch, 240x320 portrait mode TFT LCD display module with a resistive touch panel (RTP). It features a resolution of 240x320 dots and a brightness of 300 cd/nits (typical value), with a contrast ratio of 500:1 (typical value). Equipped with a built-in ILI9341 driver IC, it supports 8080 MCU 8-bit/16-bit SPI (3-Wire/4-Wire) interfaces. The module measures 55.94mm (W) x 77.60mm (H), with an active area size of 48.6 x 64.8 mm. It functions efficiently within a temperature range of -20℃ to +70℃, while its storage capabilities extend from -30℃ to +80℃. If customers require a high brightness backlight, please contact us for custom solution.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

This Victronix 3.5 inch 320x480 IPS TFT Module with CTP is a high-performance 3.5 inch IPS TFT LCD module with integrated capacitive touch panel (CTP), designed and manufactured by Victronix Tecenstar. The Victronix 3.5inch TFT module combines a 320×480 pixels resolution display and a 16.7M full-color display with IPS technology, it ensures crisp visuals optimized for a full 80° viewing angle viewing angle. As a professional TFT module manufacturer and supplier in China, this Victronix 3.5inch TFT Module uses ILI9488 display controller and GT911 touch controller support RGB interface and I²C touch communication to meet customers' requirements.

The Victronix 10.1-inch TFT LCD module pairs a 1024 x 600 widescreen resolution with a normally black LCD cell and a compact 40-pin interface, making it a practical fit for HMIs, control panels and embedded terminals that need more screen area than a 7-inch part without jumping to the cost and power of a large-format display. Normally black means each pixel blocks light when unpowered, so the panel rests at black rather than white — better contrast in dark UI states, no bright glow at the panel edges, and a fail-safe appearance if drive is lost.

The VXT101BAHA-02C combines a 10.1 inch color TFT LCD with 5-point capacitive touch. Wide viewing angles, LVDS display input and USB or I²C touch interfaces support integration into embedded terminals and equipment control panels.