China 21.5 inch 1920x1080 TFT LCD module Manufacturer, Supplier, Factory
We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for 21.5 inch 1920x1080 TFT LCD module,21.5 inch FHD LVDS display,dual channel LVDS TFT module 1920x1080,500 cd/m² 21.5 inch LCD panel,1000:1 contrast TFT LCD module, We maintain timely delivery schedules, innovative designs, top quality and transparency for our buyers. Our moto should be to supply quality goods inside of stipulated time.
21.5 inch 1920x1080 TFT LCD module, Make sure you really feel free to send us your requirements and we'll respond to you asap. We now have got a qualified engineering group to serve for your just about every in depth needs. Cost-free samples could be sent for yourself personally to understand much more information. In an effort to meet your requires, remember to actually feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd items. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is actually our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
Related Products
Hot Products
3.5 Inch 320x240 TFT LCD Module with Resistive Touch 18-Bit RGB - VXT350LQZ-01P
The VXT350LQZ-01P is a 3.5-inch 320 x 240 QVGA TFT LCD module with a 4-wire resistive touch panel, and the touch specification is the reason to look at it. Section 6 publishes what almost nothing in this size does: linearity of +/-1.5% after environmental and life testing, terminal resistance per axis, insulation resistance of 20 megohms minimum, response time under 10 ms, light transparency of 78% minimum, operation force of 80 gf typical, surface hardness of 3H minimum, 100,000 pen sliding cycles and 1,000,000 hitting cycles - with the test conditions for each. Two other figures are unusually trustworthy. Brightness carries both a floor and a ceiling, 280 minimum and 420 maximum around the 350 typical, so you can see the production spread as well as the worst case.The viewing angles are the narrowest in our range at 25 degrees typical on one horizontal side and 45 everywhere else, and while the specification states a 6 o'clock viewing direction, it is the horizontal pair that is asymmetric rather than the vertical one - so confirm the orientation with us and expect a narrow cone.
4.0 Inch Round TFT LCD Module 720x720 MIPI with Touch Interface - VXT400MCCA-01
The VXT400MCCA-01 is a round TFT module: 720 x 720 pixels in a square array with a circular active area of 101.52 mm diameter. It is the largest round module we offer — the others are 1.6 and 2.1 inches — and at 720 x 720 the highest resolution, at 180 PPI. The round shape suits products whose face is already circular: instrument gauges, thermostats, rotary controls, speaker and hub covers, and automotive clusters. Designers should know that the circle covers only 78.5% of the pixel array, so the four corners are invisible and content must stay within about 45 mm of centre. It runs MIPI DSI with four data lanes, and the capacitive touch interface sits on the same 30-pin connector — interrupt, I2C, reset and two dedicated supply pins — so one flex and one socket cover display and touch. Separate 1.8 V and 3.3 V rails mean 1.8 V host logic connects directly with no level shifting. The module is 2.09 mm thick, the thinnest in this size class.
2.4 Inch 240x320 Transflective Sunlight Readable TFT LCD Module Anti-Glare - VXT240FBQS-01
The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.
7 Inch G+G Capacitive Touch Panel with FT5426 - CTP-T700IXN-06C
The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.
5.0" 800x480 Capacitive Touch IPS TFT LCD Module
This Victronix 5.0 inch Multi Touch IPS TFT Module with CTP is a robust 5.0-inch TFT LCD module designed for demanding applications. It has a sharp 800×480 resolution and a vibrant 16.7M color display, delivering exceptional visual clarity from all viewing angles. As a professional TFT module manufacturer and supplier in China, this Victronix 5inch TFT Module integrates capacitive touch support to enable smooth 5-finger multi-touch interaction through its hardened (≥6H) cover glass to provide superior application performance.
7 Inch 800x1280 Optically Bonded Touch LCD
The VXT700YIA-02C combines a portrait TFT display with an optically bonded capacitive touch panel. Its tall viewing area suits scrolling menus and guided workflows, while 10-point touch supports interactive functions through compatible host software.
- Related Blog
- Reviews
