China 500 nit TFT LCD Manufacturer, Supplier, Factory

This Victronix 2.6 inch Resistive Touch IPS TFT Module. Featuring 280 cd/m² brightness (max 340 cd/m²), 500:1 contrast ratio, and anti-glare polarizer, this display ensures sunlight-readable clarity and true-color reproduction (CIE white point: x=0.288, y=0.325).

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The CTP-VX185A2132 is an 18.5-inch capacitive touch panel in G+G construction, and the only panel in our range with a USB interface — so it works the moment you plug it in, with the multi-touch HID driver already in Windows, Linux, macOS and Android. There is no I2C address to configure and no level shifting to worry about. Ten-point touch, a 409.8 x 230.4 mm active area matched to 1366x768, powered from 5 V. Built for kiosks, information displays, POS and interactive screens.

The Victronix 10.1-inch TFT LCD module pairs a 1024 x 600 widescreen resolution with a normally black LCD cell and a compact 40-pin interface, making it a practical fit for HMIs, control panels and embedded terminals that need more screen area than a 7-inch part without jumping to the cost and power of a large-format display. Normally black means each pixel blocks light when unpowered, so the panel rests at black rather than white — better contrast in dark UI states, no bright glow at the panel edges, and a fail-safe appearance if drive is lost.

This Victronix 3.5 inch 320×240 QVGA IPS TFT Module with a 24-bit RGB interface. This TFT LCD module designed for robust and reliable operation in demanding industrial and embedded applications. Combining a sharp QVGA resolution with vibrant color performance and a wide viewing angle, this module delivers exceptional clarity for user interfaces, instrumentation, and control systems. As a professional manufacturer and supplier of TFT modules in China, this Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.