China 7 inch capacitive touch LCD Manufacturer, Supplier, Factory

This 3.5 inch TFT display VXT350CHH-01P by Victronix is commonly used in Industrial HMIs & Control Panels, Medical Devices, Portable Test Equipment, Automotive Diagnostics, and IoT Edge Devices.

This Victronix 2.4 inch 240x320 IPS TFT Module is a high-quality 2.4 inch TFT LCD module engineered for reliable performance in demanding applications. Featuring an IPS (In-Plane Switching) panel with a resolution of 240×320 pixels, it delivers wide viewing angles (80° horizontal/vertical) and vivid 262K color reproduction. Ideal for industrial controls, medical devices, and portable instruments, this module combines compact dimensions (42.72×60.4×2.2 mm) with robust engineering.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The VXT430BPSA-04 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, supplied without touch. It shares its entire electrical and mechanical platform with our VXT430MPSA-16 and differs in one figure: a 20,000-hour backlight instead of 50,000. That makes it the choice where a display can be serviced easily — supervised indoor equipment, machine panels, instruments — rather than unattended installations where a service visit costs more than the panel. Rated -30 to +80°C.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The VXT397FBWS-01 is a 3.97-inch transflective TFT LCD that combines ambient-light reflection with LED backlighting. An anti-glare surface and compact portrait format support integration into handheld instruments and space-conscious equipment.