China 7 inch TFT display Manufacturer, Supplier, Factory

This Victronix 3.5inch 320*240 IPS TFT Module is a high-quality 3.5 inch TFT LCD module engineered for reliability in industrial, medical, and embedded systems. Featuring a 320 × 240 resolution with a sharp 70.08 × 52.56 mm active area, this Normally Black display delivers crisp visuals with a pixel pitch of 0.219 × 0.219 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 6.2 inch 800×480 TFT Module offers a typical brightness of 700 cd/m² and a contrast ratio of 600:1, ensuring excellent readability from various angles. Secondly, it integrates a backlight unit utilizing 18 white LEDs with a typical lifetime of 30,000 to 50,000 hours (to 50% initial brightness), ensuring clear visibility in all lighting conditions. Besides, it supports a 24-bit parallel RGB with DE/SYNC mode control interface and an ILI6123H + ILI5480 controller. In addition, it passes rigorous environmental testing, including thermal shock (-30°C ↔ +80°C cycles), humidity storage (60°C/90% RH), and mechanical vibration, ensuring it can operate seamlessly across an extended temperature range from -20°C to +70°C. This 6.2 inch TFT display by Victronix is commonly used in medical devices, vehicle displays, industrial control systems, and portable instrumentation where readability under varied lighting conditions is critical.

This Victronix 3.5'' 480x640 transflective IPS TFT Module is a high-performance 3.5 inch TFT LCD module featuring advanced Transflective IPS technology. This module delivers exceptional readability both indoors and under direct sunlight, making it ideal for industrial controls, portable instrumentation, and outdoor equipment.

The CTP-VX156B5544-GG is a 15.6-inch capacitive touch panel in G+G construction, built for laptop-class and portable equipment rather than fixed kiosks. Note for buyers: at 15.6 inches it is inspected in the 10.1–17 inch cosmetic tier, which is about 25% stricter than the tier used for 21.5-inch and larger panels. Transmittance is at least 85% with ≥6H hardness, response is ≤12 ms, and it draws just 12–14.5 mA — low enough for battery-powered devices. Suited to portable terminals, medical carts, industrial laptops and handheld HMI.

The Victronix VXT700QAEW-01C arrives as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, a 0.70 mm cover lens and the display cell are built into one bonded stack — G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step, and no bonding process in your build. Luminance is 850 cd/m² typical with an 80/80/80/80 viewing angle, video comes in over 40-pin LVDS driven by EK79001HN and EK73215BCGA, and touch is managed by an ILI2130 controller. Rated -30°C to +85°C.

The VXT350HQS-01X-W is a 3.5-inch TFT LCD module with 320x240 QVGA resolution and an anti-glare top polarizer — the only module in our range that specifies one. Combined with all-direction viewing and no grayscale inversion, it stays readable wherever the operator stands and wherever the light comes from, without spending brightness or backlight life on the problem. Rated -30 to +85°C, with 24-bit RGB for video and a separate SPI channel for configuration.