China Embedded system LCD display Manufacturer, Supplier, Factory

This Victronix 5.7 inch 640x480 IPS TFT Module is a high-performance 5.7 inch TFT-LCD module engineered for demanding industrial applications. Featuring an IPS panel with 640×480 resolution and 16.7 million color depth, this RoHS-compliant solution integrates an LCD panel, driver IC (JD9168S), FPC, and LED backlight into a ruggedized package. As a professional manufacturer and supplier of TFT modules in China, Victronix 5.7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT320HQS-02P is a 3.2inch, 240x320 portrait mode TFT LCD display module with a resistive touch panel (RTP). It features a resolution of 240x320 dots and a brightness of 300 cd/nits (typical value), with a contrast ratio of 500:1 (typical value). Equipped with a built-in ILI9341 driver IC, it supports 8080 MCU 8-bit/16-bit SPI (3-Wire/4-Wire) interfaces. The module measures 55.94mm (W) x 77.60mm (H), with an active area size of 48.6 x 64.8 mm. It functions efficiently within a temperature range of -20℃ to +70℃, while its storage capabilities extend from -30℃ to +80℃. If customers require a high brightness backlight, please contact us for custom solution.

The VXT121QXHA-01 is a 12.1-inch TFT module with 1024 x 768 pixels, and it is the only 4:3 panel in our 12.1-inch range — the other two are 1280 x 800. That matters because XGA in a 4:3 layout is what a very large installed base of industrial controllers, medical instruments and test equipment was designed around, and it remains the usual target when a display in existing hardware has to be replaced. The active area is 245.76 x 184.32 mm with pixels that are square to ten decimal places, so circles and dial scales stay true. Brightness is 1000 cd/m², the highest figure we publish in this size, and the viewing angle is 85° in all four directions with no stated best direction. The interface is 4-lane LVDS on a 20-pin connector, and it runs from a single 3.3 V rail — no separate gate or analogue supplies to generate. We are equally direct about what this module demands and what is not yet documented: the backlight draws about 14 W, which is over 90% of the module's total power and needs a real thermal plan; brightness and viewing angle are given as typical values without stated minimums; and the driver IC, outline dimensions and LVDS data mapping are not in the file we hold.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.