China Industrial automation display Manufacturer, Supplier, Factory

This Victronix 2.4 inch 240x320 IPS TFT Module is a high-quality 2.4 inch TFT LCD module engineered for reliable performance in demanding applications. Featuring an IPS (In-Plane Switching) panel with a resolution of 240×320 pixels, it delivers wide viewing angles (80° horizontal/vertical) and vivid 262K color reproduction. Ideal for industrial controls, medical devices, and portable instruments, this module combines compact dimensions (42.72×60.4×2.2 mm) with robust engineering.

Victronix VXT350QHI-19: a 3.5 inch portrait TFT LCD module with 320x480 pixels and 262K colors over a 48.96 x 73.44 mm active area. All viewing direction with free grey-scale inversion and 80 degrees at 3, 6, 9 and 12 o'clock alike, so there is no wrong mounting orientation. RGB, MCU and SPI interfaces on one 50-pin FPC selected by IM0, IM1 and IM2, ILI9488 controller, VCI 2.8 V and IOVCC 1.8 V rails so 1.8 V logic drives it directly, 6-LED backlight, 2.25 mm thin, -20 to +70 C operating. For handheld instruments, portable monitors, smart home control panels, POS terminals, medical devices and industrial HMI.

The VXT430MPIA-03 is a 4.3-inch TFT module with a 480 x 272 RGB panel, an ILI6485D driver and a 5S2P white LED backlight, and no touch panel. It is the display-only member of a pair: the VXT430MPIA-03C is the same module with five-point capacitive touch bonded on. Comparing the two gives something most suppliers cannot show — a measured figure for what adding touch actually costs. This module is rated 500 cd/m² and the touch version 400, on otherwise identical hardware: same panel, same driver, same backlight, same timing, and CIE colour coordinates matching to four decimal places. That difference is the touch panel, and it works out at about 20 per cent of your brightness. Beyond that it is a well-documented module: 800:1 contrast minimum, a published logic current of 22 mA giving a calculable total of about 0.67 W, and full timing tables for three operating modes.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.

The VXT104QXHA-03 is a 10.4 inch XGA TFT LCD module with high brightness, wide viewing angles and PWM backlight control. Its LVDS interface and wide operating temperature range suit integration into industrial equipment and embedded display systems.