China Industrial control display Manufacturer, Supplier, Factory

We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Industrial control display,27 inch HMI display module,27 inch capacitive touch display,Full HD industrial display,1920x1080 touch display module, We'll do our greatest to fulfill your specifications and are sincerely searching ahead to developing mutual helpful small business marriage with you!
Industrial control display, we've been sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.

Hot Products

  • 4.3 Inch 480x272 TFT LCD Module 24-Bit RGB - VXT430INS-15

    4.3 Inch 480x272 TFT LCD Module 24-Bit RGB - VXT430INS-15

    The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.
  • 5 inch Outdoor Capacitive Touch TFT Module - VXT500BWS-03C0

    5 inch Outdoor Capacitive Touch TFT Module - VXT500BWS-03C0

    The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.
  • 4.3 Inch 480x800 Portrait IPS TFT LCD Module - VXT430GWH-02

    4.3 Inch 480x800 Portrait IPS TFT LCD Module - VXT430GWH-02

    The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.
  • 5.0

    5.0" 800x480 Capacitive Touch IPS TFT LCD Module

    This Victronix 5.0 inch Multi Touch IPS TFT Module with CTP is a robust 5.0-inch TFT LCD module designed for demanding applications. It has a sharp 800×480 resolution and a vibrant 16.7M color display, delivering exceptional visual clarity from all viewing angles. As a professional TFT module manufacturer and supplier in China, this Victronix 5inch TFT Module integrates capacitive touch support to enable smooth 5-finger multi-touch interaction through its hardened (≥6H) cover glass to provide superior application performance.
  • 1.77 Inch 500 Nits SPI TFT LCD Display

    1.77 Inch 500 Nits SPI TFT LCD Display

    The VXT177HSS-13 combines 500 cd/m² typical brightness with a 4-wire SPI interface in a compact 1.77-inch TFT LCD. An ST7735V driver and 12-pin connection make the module an option for embedded designs that prioritize display brightness and serial connectivity.
  • 7 Inch LVDS TFT LCD with Capacitive Touch

    7 Inch LVDS TFT LCD with Capacitive Touch

    The VXT700BAHA-01CA brings color graphics and capacitive touch to compact equipment panels. Its LVDS display connection and I2C touch interface support host-controlled menus, settings and status screens in a single front-panel assembly.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept