China LVDS LCD module Manufacturer, Supplier, Factory

This Victronix Segment LCD Module is a high-performance monochrome dot matrix Liquid Crystal Display Module (LCM) designed by VICTRONIX for reliable embedded applications. Featuring a transmissive HTN (High-Twist Nematic) display with positive image and 6 o’clock viewing direction, this module delivers clear visuals in a compact form factor. Integrated with a blue LED backlight (VF=3.1V±0.2V, IF=30mA), it ensures excellent readability in diverse lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix VA Segment LCD Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT700B1YI-03 is a 7-inch TFT module built in portrait: a 103.60 x 162.27 mm outline, 94.2 x 150.72 mm active area, and 800 x 1280 resolution at 216 PPI. Two figures set it apart. The first is orientation — most 7-inch modules are landscape, and this one is tall, which suits forms, lists and scrolling content. The second is brightness: 800 cd/m² minimum and 1000 typical. That minimum is the highest guaranteed brightness in our range, four times the 200 cd/m² minimum of our 10.1-inch module, and it is a floor you can hold a supplier to rather than an average. It runs MIPI DSI on the widely used ILI9881 driver, has an anti-glare top polarizer, 80° minimum viewing in all four directions, and a 20-LED backlight at 1.28 W with 30,000 hours minimum life. One contradiction in the document needs resolving before layout, and we state it rather than pick the reading that looks better.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The VXO-011AMA-097 is a 1.1-inch AMOLED in a 7:3 portrait format — taller, relative to its width, than any other display we make. A band's width is fixed by the strap but its height is not, and against our 0.95-inch band module this panel gives 294 rows instead of 240: 22.5% more vertical content for 1.5% more width. Same driver, same interface, same touch — just more room to stack readings. It also has touch on its own independent supply rails, so the touch layer can stay awake while the display sleeps. No backlight, 60,000:1 contrast, 420 cd/m², about 0.058 W at full white. RM69310, SPI, -20 to +70°C.

The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.