China touch panel for interactive whiteboard Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix Transflective Segment VA LCD Module provides reliable performance and versatile display capabilities, designed to meet particular customer integration requirements. This unit features a clearly defined segment and common driver pinout structure, ensuring straightforward interfacing with control circuits. This Victronix VA Segment LCD Module is suitable for automation equipment and digital measuring instruments, medical measuring devices (blood pressure monitors, infusion pumps, etc.), meters, handheld devices, car dashboards and car audio systems, audio systems, coffee makers, and microwaves.

This Victronix 3.97 inch 480x800 Resistive Touch TFT Module is a high-performance 3.97 inch TFT LCD module designed by Victronix for industrial, medical, and embedded systems. It has an active area (51.84×86.40 mm) with a sharp 480×(RGB)×800 resolution (pixel pitch: 0.108×0.108 mm). Features a bright 300 cd/m² (typ.) anti-glare transflective panel with a high 500:1 contrast ratio (typ.) and optimized 6 o'clock viewing direction. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.97 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.

The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.

The VXT101BAHA-01C pairs a color TFT LCD with GT928 capacitive touch control. Its dedicated I2C touch connection and LVDS display interface suit embedded designs that bring on-screen controls, equipment readings and status information into one operator panel.

The VXT430HPWA-03C is a 4.3-inch TFT LCD module with 480x272 resolution and integrated capacitive touch, wired as two independent subsystems: the display runs on its own 40-pin interface and VDD rail, while the FT5446 touch controller has a separate 6-pin FPC and its own VDD-CTP supply. That lets you power the display down and keep touch alive, or reset touch without touching the display. Rated 850 cd/m² and -30 to +85°C, it suits outdoor handheld terminals, field instruments and portable equipment.