China 7 inch capacitive touch panel Manufacturer, Supplier, Factory

This Victronix 4.6 inch Bar Type IPS TFT Module is a high-quality 4.6 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It combines IPS technology with a unique bar-shaped form factor, delivering exceptional 65° viewing angles in all directions, vivid color reproduction, and consistent image clarity essential for critical monitoring. As a professional manufacturer and supplier of TFT modules in China, Victronix 4.6 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 5 inch Sunlight Readable TFT Module is a high-performance 5 inch display solution engineered for outdoor and industrial applications. Featuring a 640×480 resolution active area (101.57×76.18 mm) with 16.7 million colors and RGB888 interface, this RoHS-compliant module delivers exceptional visual clarity and reliability.

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.

The VXT350MHSA-08 is a 3.5-inch portrait TFT module: 320 x 480 pixels over an active area of 48.96 x 73.44 mm, in a true 2:3 shape. What distinguishes it is how many ways it can be driven — RGB parallel, 3-wire SPI, 4-wire SPI and 8080-style MCU parallel all sit on one 50-pin connector, selected by three pins, IM0, IM1 and IM2, read at power-up. That means the interface stops being a decision you must make before choosing a display: you can prototype on SPI and move to RGB when you need the refresh rate, without changing the module, the connector or the enclosure. Driven by an ST7796U, it also runs its 3.0 V backlight with no boost converter — no inductor, no switching noise — unlike the other 3.5-inch modules in the range which need 18 to 19 V. Contrast is given as an 800:1 minimum, viewing angle is 80° in all four directions with viewing direction ALL, and total consumption is about 0.41 W from a measured 19.51 mA of logic current.

The VXT500BWEF-01 is a 5.0-inch transflective TFT LCD module with 800x480 resolution — the only transflective panel in our range. It reads in sunlight by reflecting ambient light rather than outshining it, and the backlight can be dimmed or switched off outdoors, cutting power sharply. Brightness is 200 cd/m² with 60:1 contrast and a 15 ms response, the fastest we specify. The panel is a 6 o'clock type and the logic rail runs from 2.5 V to 3.3 V. Rated -20 to +70°C.

The VXT700YIA-02C combines a portrait TFT display with an optically bonded capacitive touch panel. Its tall viewing area suits scrolling menus and guided workflows, while 10-point touch supports interactive functions through compatible host software.