China 1.1 inch AMOLED display Manufacturer, Supplier, Factory

The VXT430MBVS-03 is a 4.3-inch TFT LCD module with 480 x 800 pixels in portrait. The active area of 56.16 x 93.60 mm is taller than it is wide by an exact 5:3, matching the pixel count, and the pitch works out to 0.117 mm on both axes - square, so circles and dial scales need no correction. Pixel count is 384,000, identical to an 800 x 480 landscape panel: a portrait interface is a transposition of what you already have, and the frame buffer is the same 750 KB at RGB565. One detail saves a component. Logic IO runs from a separate 1.8 V rail, and with VIH at 0.7 IOVCC a 1.8 V host drives it directly - no level shifters, which is not the case on the 3.3 V IO modules elsewhere in this size. Images travel over 24-bit RGB with a real data-enable line, and the driver is configured over a 3-line serial interface, so both paths are on the one 45-pin FPC. Contrast carries a stated 700 minimum against 1000 typical, uniformity 80% minimum, and viewing angle 85 degrees in all four directions with no preferred orientation.

The VXTA40CAH-01 is a 10.4-inch TFT in 4:3 — the format industrial and medical equipment has been built around for twenty years. Its active area of 211.2 x 158.4 mm is the standard 10.4-inch size, so it drops into a cutout originally cut for a panel of this class, and legacy software written for 800x600 does not letterbox. It is bright at 650 cd/m² typical with a 520 minimum, uses an anti-glare polarizer for factory lighting, and ships without touch so it pairs directly with our 10.4-inch capacitive touch panel. The documentation is also unusually complete: ten reliability test items each citing its IEC and GB standard, a 50,000-hour MTBF, and inspection criteria given in millimetres. 24-bit RGB on 60 pins, -20 to +70°C.

The VXT430MPSA-16 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, built around a backlight rated for 50,000 hours — the longest in our range and roughly two and a half times the 20,000-hour life of our high-brightness 4.3-inch module. Sixteen LEDs share the load across eight series pairs, which is why it lasts. It ships without touch, so you fit your own or none at all. Rated -30 to +80°C for panel and control equipment that runs continuously.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.

The Victronix VXT700QAEW-01C is a 7.0-inch TFT LCD module that ships as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step and no bonding process in your build. Luminance is 1000 cd/m² typical with an 80/80/80/80 viewing angle, video arrives over 40-pin LVDS driven by EK79001HN and EK73215BCGA, with an ILI2130 touch controller. Rated -30°C to +85°C, RoHS compliant.

The Victronix VXT700WRA-01 is a 7.0-inch TFT LCD module with 800 x 480 pixel resolution and support for up to 16.7M colors, built for embedded and industrial equipment that needs a compact, easy-to-drive display. Its 24-bit parallel RGB interface with DE (data enable) and DCLK lets most mainstream MCUs and MPUs — STM32, NXP i.MX, Allwinner, Rockchip and similar — drive the panel directly from their on-chip LCD controller, with no LVDS serializer or bridge chip and no extra BOM cost. The module runs from a single 3.3 V logic supply, uses an RM53052 / RM57452 driver IC, and is rated for a -20°C to +70°C operating range, so it works in unheated enclosures and outdoor cabinets.