China AMOLED display for smart band Manufacturer, Supplier, Factory

The Victronix VXT700WHA-02P​ is a 7.0-inch 800 × 480 TFT LCD module with a touch panel, driven by MOS_CHIP_G424A​ over an 18-bit parallel RGB interface on a 40-pin 0.5 mm Hirose FH19-40S-0.5SH connector. The reason to look at it is the interface freedom.​ A MODE pin selects between DE mode and SYNC mode, so it works with hosts that emit DE and hosts that emit only HS and VS. L/R and U/D give hardware scan inversion.​ And full numeric timing is published​ — 860 clocks by 528 lines at 27.2 MHz, which is exactly 60 Hz.

This Victronix 3.5'' 480x800 IPS Resistive Touch TFT Module is a robust 3.5 inch TFT LCD module engineered for demanding industrial applications. Combining exceptional optical performance with reliable resistive touch technology, this module delivers a premium visual interface solution. As a leading manufacturer and supplier of TFT modules in China, the Victronix 3.5 inch TFT module strictly complies with ROHS environmental standards to ensure excellent application performance. We offer a customized service to meet the needs of our customers.

The VXT101MBFH-01 is a 10.1-inch TFT LCD module with 1920 x 1200 pixels — WUXGA, the interface is dual-channel LVDS and contrast carries a stated 700 minimum against 800 typical. Brightness is 300 cd/m² typical with no stated minimum.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-VX104B5747-GG is a 10.4-inch capacitive touch panel in G+G construction, sized for the 1024x768 industrial panels that a great deal of equipment was built around — so it is usually bought as a replacement rather than a new design. At 10.4 inches it sits just past the 10.1-inch boundary in the inspection standard, making it one cosmetic tier more permissive than sub-10-inch panels. Transmittance is ≥85% with ≥6H hardness, response ≤12 ms. Suited to industrial HMI, medical devices, CNC controls and legacy upgrades.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.