China 1.4 inch TFT LCD module Manufacturer, Supplier, Factory

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

The VXT500BWS-03C0 is a 5.0-inch TFT LCD module with 800 x 480 pixels and a projected capacitive touch panel. Three things decide whether it suits your product. Brightness is 800 cd/m² minimum against 1000 typical — a stated floor you can hold us to, and roughly three times what our touchless 5-inch panel delivers. Viewing angle is 80° minimum in all four directions with no preferred orientation and no grey-scale inversion, so how you mount it is a mechanical decision rather than an optical one. And it shares an active area, resolution, pixel pitch and outline with our touchless 5-inch module, so an existing 5-inch 800x480 design takes it without recutting the enclosure. The display runs 24-bit RGB on a 40-pin FPC from a single 3.3 V rail, with touch on its own 10-pin I2C connector carrying reset and interrupt.

This Victronix 15.0 inch 1024*768 IPS TFT Module is a high-performance electrical module designed to deliver reliable power management in demanding applications. It provides customers with a premium display, featuring an 800×800 resolution within a 304.128×228.096 mm active area, an 89° viewing angle (all directions), and a typical brightness of 450 cd/m². As a professional TFT module manufacturer and supplier in China, this Victronix 15 inch TFT Module strictly complies with the ROHS environmental standards to provide superior application performance. Additionally, we provide customized services tailored to meet the specific needs of our clients. This Victronix 15 inch TFT Module is designed for factory automation control systems, visualization tools, tool machine control systems, medical devices, advertising machines, robots, smart homes, notebooks, digital camera applications, industrial equipment devices, and other electronic products.

The VXO-011AMA-097 is a 1.1-inch AMOLED in a 7:3 portrait format — taller, relative to its width, than any other display we make. A band's width is fixed by the strap but its height is not, and against our 0.95-inch band module this panel gives 294 rows instead of 240: 22.5% more vertical content for 1.5% more width. Same driver, same interface, same touch — just more room to stack readings. It also has touch on its own independent supply rails, so the touch layer can stay awake while the display sleeps. No backlight, 60,000:1 contrast, 420 cd/m², about 0.058 W at full white. RM69310, SPI, -20 to +70°C.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The VXT430BPSA-04 is a 4.3-inch high-brightness TFT LCD module built for equipment that works outdoors or in harsh industrial environments. Two ratings define it: a bright backlight driven harder than standard, and a -30 to +80°C operating range that covers sealed enclosures in summer and unheated installations in winter. The brightness has a price — the same 16-LED array lasts 20,000 hours here against 50,000 in our standard-brightness module. Supplied without touch, with 24-bit RGB888 and 16 LEDs at 24 V.