China 10.1 inch TFT no touch Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix Transflective Segment LCD Module is a high-performance Transflective Segment LCD Module (Model 4215) that delivers exceptional clarity in diverse lighting environments. Engineered for reliability and precision, this display features a compact design with critical dimensions of 107.60±0.20 mm × 87.00±0.20 mm and a minimum viewable area (VA) of 84.00 mm × 86.50 mm, ensuring consistent visual performance. This Victronix VA Segment LCD Module is suitable for instruments, office equipment, industrial control, home appliances, communication, medical, bank display terminal, digital products, navigation, etc.

This Victronix Replace HTN Segment Varitronix LCD Module is a high-performance monochrome dot-matrix Liquid Crystal Display (LCM) module for industrial and embedded applications. Featuring a transflective HTN (High-Twist Nematic) panel with a positive display and optimal 6 o’clock viewing direction, this module delivers clear visibility across diverse lighting conditions.

This Victronix 1.3 inch 240x240 TFT Module is a high-quality 1.3 inch diagonal active area (23.4 mm × 23.4 mm) with 240×240 RGB resolution and a fine pixel pitch of 0.0975mm, delivering crisp visuals in a space-efficient footprint (26.16 mm × 29.13 mm × 2.30 mm).

The VXT800BYH-01 is an 8.0-inch 800 x 1280 portrait TFT LCD module driven by an HX8260 over a 4-lane MIPI DSI interface on a 24-pin FPC, and the reason a panel this size ships on 24 pins is the interface. Four differential data lanes plus one differential clock pair carry what a 24-bit parallel RGB bus would need fifty pins to carry, so a 1,024,000-pixel display fits a host with a DSI peripheral and almost no other pins to spare. It is the most portrait panel here - 800 x 1280 in a 16:10 column - with square 0.13455 mm pixels at 188.8 PPI, 16.7M colours stated outright, and a diagonal of 203.09 mm that lands within 0.05 per cent of the nominal 8.0 inch. And TE is brought out on pin 4, which is the tearing effect output: with a 2.0 MB frame buffer too big to double cheaply, being able to stay single-buffered and still write tear-free is the difference between a workable design and an expensive one. Three things need settling before you commit. The logic voltage is stated two ways and they do not agree: pin 7 is annotated IOVCC 1.8V while the electrical table's supply-voltage-for-logic row gives 2.8 V typical, and the thresholds are written as fractions of VDD without saying which rail, so a 1.8 V host is either comfortably inside or well outside depending on which figure holds. The storage temperature runs -30 to +70 against an operating range of -20 to +70, so the high end is not wider at all - storage should be wider at both ends and here it is not. And the backlight's seven-in-series array is derived rather than stated, and it puts 27 mA through each string against a 30 mA absolute maximum.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.

The VXT430BPSA-04 is a 4.3-inch high-brightness TFT LCD module built for equipment that works outdoors or in harsh industrial environments. Two ratings define it: a bright backlight driven harder than standard, and a -30 to +80°C operating range that covers sealed enclosures in summer and unheated installations in winter. The brightness has a price — the same 16-LED array lasts 20,000 hours here against 50,000 in our standard-brightness module. Supplied without touch, with 24-bit RGB888 and 16 LEDs at 24 V.