China 10.4 inch HDMI TFT module Manufacturer, Supplier, Factory

This Victronix Replace HTN Segment Varitronix LCD Module is a high-performance monochrome dot-matrix Liquid Crystal Display (LCM) module for industrial and embedded applications. Featuring a transflective HTN (High-Twist Nematic) panel with a positive display and optimal 6 o’clock viewing direction, this module delivers clear visibility across diverse lighting conditions.

This Victronix 1.3 inch 240x240 TFT Module is a high-quality 1.3 inch diagonal active area (23.4 mm × 23.4 mm) with 240×240 RGB resolution and a fine pixel pitch of 0.0975mm, delivering crisp visuals in a space-efficient footprint (26.16 mm × 29.13 mm × 2.30 mm).

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT084XJWA-01 is an 8.4 inch XGA TFT LCD module with a 4:3 viewing area for instruments and monitoring interfaces. Wide viewing angles, adjustable backlighting and an extended operating temperature range support equipment integration.