China 18-bit RGB LCD Manufacturer, Supplier, Factory

This Victronix 7 inch 1024x600 MIPI IPS Touch TFT Module is a high-performance 7 inch TFT-LCD module with integrated capacitive touch panel (CTP). Engineered for reliability in demanding environments, this module combines a BOE-sourced IPS panel with 1024 × 600 resolution and 16.7 million colors for vivid visuals and wide viewing angles (80° at Cr≥10 at all directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 9 inch 800x480 TFT Module is a high-performance 9 inch TFT LCD module engineered for demanding industrial applications. Featuring an 800×480 RGB resolution and a 16:9 aspect ratio, it delivers crisp, vibrant visuals with an active display area of 198.0 × 111.7 mm (7.80 × 4.40 inches). The module leverages a 24-bit RGB interface and advanced driver ICs (HX8664-B + HX8264-E) for seamless integration and reliable signal processing.

The VXT500TWH-01 is a 5.0-inch TFT LCD module with 800 x 480 pixels in a landscape 5:3 shape, luminance has a stated minimum of 180 against 250 typical, uniformity a minimum of 75%, and the viewing angle a floor in every direction.The interface is a plain 24-bit parallel RGB on a 40-pin FPC from a single 3.3 V rail, which a microcontroller with an LCD controller drives directly, and the frame buffer is a manageable 750 KB at RGB565.

The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT686BZSA-01 is a 6.86-inch bar-type TFT LCD for elongated display layouts. With 16.7 million colors and wide viewing angles, the module provides space for status indicators, menu items and operating information in compact equipment panels.