China 480x800 LCD display Manufacturer, Supplier, Factory

The VXT350QHI-26C is a 3.5-inch 320 x 480 portrait TFT LCD module with a capacitive touch panel, driven by ILI9488, and what sets it apart is that three interface families sit on one 50-pin FPC - 24-bit RGB, MCU parallel in 8, 9, 16, 18 or 24-bit form, and SPI - selected by three IM strap pins. The touch is a mutual-capacitance sensor on its own separate 20-pin FPC carrying seven TX and five RX lines. An active area of 48.96 x 73.44 mm whose 2:3 aspect matches the dot matrix precisely, and a diagonal of 88.265 mm, or 3.4750 inches. Contrast is 700 typical, all four viewing angles are 80 degrees with an ALL viewing direction so the module mounts any way round, uniformity carries a floor of 75 per cent, NTSC is 69 typical, and all eight CIE coordinates are published. The backlight is six LEDs in parallel at 120 mA with a forward voltage from 2.7 to 3.3 V, so a 3.3 V rail leaves no headroom and the current is high for a parallel array.

This Victronix 4.3 inch 480x272 TFT Module is a high-performance 4.3 inch TFT-LCD module engineered for demanding applications. Combining a sharp 480 × 272 RGB display, 16.7 million colors, and robust industrial-grade construction, this module delivers exceptional clarity and reliability in harsh environments. RoHS-compliant and backed by rigorous testing, it integrates seamlessly into medical devices, automotive systems, industrial controls, and portable instruments.

This Victronix 8 Inch AT080TN64 LCD Display is a high-performance 8 inch TFT LCD module engineered for embedded systems requiring compact size, reliability, and vivid display quality. Featuring 800(RGB)×480 resolution within a compact 192.8×116.9×6.4mm footprint, this anti-glare display combines clarity with durability. It offers a typical brightness of 450 cd/m², wide viewing angles of 70° horizontal/50° vertical, and a contrast ratio of 500:1, ensuring excellent readability from various angles. Secondly, it supports a 24-bit RGB TTL interface with programmable scan direction (via U/D and L/R control pins) and DE/SYNC mode selection. Besides, it features an LED system with a lifespan of 20,000 to 50,000 hours , ensuring long-term use in various industrial applications. In addition, it is validated through thermal shock, humidity, vibration, and drop tests to operate reliably in extreme temperatures (-20°C to +70°C). For Industrial HMIs, medical devices, transportation systems, and embedded applications requiring sunlight-readable, shock-resistant displays with extended temperature operation.

The VXT397IWI-01P is a 3.97-inch 480 x 800 portrait TFT LCD module with a 4-wire resistive touch panel, and the touch is what distinguishes it from the other 480 x 800 panel in this size.Resistive sensing responds to pressure rather than to a finger's conductivity, so it works with gloves, wet hands, a stylus or a tool tip, which is why it is still the choice for industrial and medical equipment. The optical table is also unusually well specified: luminance carries a stated minimum of 240 and a stated maximum of 420 alongside the 300 typical, and contrast carries a 300 minimum, so there are figures you can hold us to at incoming inspection - which is not the case on several modules in this size. Two things need settling before you commit. This is a TN panel: the specification states a 6 o'clock viewing direction, grey-scale inversion at 12 o'clock, and vertical viewing angles of 50 degrees one way and 25 the other, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, the IPS panel also in this size is the better buy.

The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.

The CTP-T430GF-04 is a 4.3-inch capacitive touch panel in G+G construction, sized for 480x272 displays and matched to the 95.84 x 54.66 mm view area of our 4.3-inch TFT module. It runs from two rails — VDD at 2.8–3.3 V and IOVCC at a fixed 3.3 V — and its 10-pin FPC puts VDD on pin 10 rather than pin 2. Rated -10 to +60°C, it is built for indoor and commercial equipment rather than industrial extremes. EETI EXC3146 controller, five-point touch.