China 2.1 inch TFT LCD module Manufacturer, Supplier, Factory

This Victronix 2.2 inch 240x320 ILI9341V TFT Module is a high-quality 2.2 inch TFT LCD module designed for industrial, medical, and consumer electronics requiring vivid color performance and reliable operation. Featuring a 240 × 320-pixel resolution and 262K color depth, it delivers sharp visuals with an active display area of 33.84 × 45.12 mm (diagonal: 55.8 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

Victronix 5.5 inch 1080p TFT Module is a high-quality 5.5 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It features a resolution of 1080×1920 pixels, a 24-bit RGB interface, and HX8399C driver IC, making it ideal for industrial controls, medical devices, portable electronics, and advanced embedded systems.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The CTP-T350GF-04 is a 3.5-inch capacitive touch panel in G+G construction, and the only portrait panel in our range — a 48.96 x 73.44 mm view area in a true 2:3 shape, matched to 320x480 displays and to our 3.5-inch portrait TFT module. It is also the only panel whose I/O runs down to 1.8 V, so a 1.8 V-logic host can drive it without a level shifter. An FT5446 controller handles five-point touch over I2C. Built for handheld instruments, wall controllers, elevator panels and portable medical devices.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.

This Victronix 3.5 inch 320×240 QVGA IPS TFT Module with a 24-bit RGB interface. This TFT LCD module designed for robust and reliable operation in demanding industrial and embedded applications. Combining a sharp QVGA resolution with vibrant color performance and a wide viewing angle, this module delivers exceptional clarity for user interfaces, instrumentation, and control systems. As a professional manufacturer and supplier of TFT modules in China, this Victronix 3.5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.