China 320x240 resistive touch display Manufacturer, Supplier, Factory

The VXT320HQS-02P is a 3.2inch, 240x320 portrait mode TFT LCD display module with a resistive touch panel (RTP). It features a resolution of 240x320 dots and a brightness of 300 cd/nits (typical value), with a contrast ratio of 500:1 (typical value). Equipped with a built-in ILI9341 driver IC, it supports 8080 MCU 8-bit/16-bit SPI (3-Wire/4-Wire) interfaces. The module measures 55.94mm (W) x 77.60mm (H), with an active area size of 48.6 x 64.8 mm. It functions efficiently within a temperature range of -20℃ to +70℃, while its storage capabilities extend from -30℃ to +80℃. If customers require a high brightness backlight, please contact us for custom solution.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 3.95 inch 480x480 IPS TFT Module is a high-performance 3.95 inch TFT LCD module designed for demanding industrial applications. With a resolution of 480×480 and a compact active area of 71.856 × 70.176 mm, this display features 262K colors, 400 cd/m² typical brightness, and an 800:1 typical contrast ratio to deliver outstanding visual clarity.

The VXT430MPIA-03C is a 4.3-inch TFT module with a five-point capacitive touch panel bonded on: a 480 x 272 RGB display and an I2C touch controller in one assembly. What sets it apart is practical rather than headline — this is the 4.3-inch module whose power you can actually budget, because it publishes a logic current of 22 mA where the sibling module rated identically leaves it as TBD. Total draw is about 0.67 W, the lowest of any 4.3-inch module we offer with touch. It is also unusually complete on the touch side: accuracy of ±1.5 mm at the centre and ±2.5 mm at the edge, surface hardness of at least 7H, and transparency of at least 85% are all given as numbers. Contrast is 800:1 minimum with 80° viewing in all four directions. Two things need attention before ordering, and both are stated here: the module matches a sibling part on every comparable figure apart from the driver IC, and its reliability programme is shorter than the rest of the range.

The VXT700MYIA-03C is a 7-inch front panel assembly: a display and touch stack under a custom cover glass carrying three functional openings — a camera window, a proximity sensor window and a microphone through-hole. The ink over the openings is specified with a number you can measure: visible light transmittance at 520 nm below 25%, which is what lets the proximity sensor hide behind the glass while still passing IR. Everything runs on one 40-pin flex at 0.30 mm pitch, and that flex carries the LED backlight as well, so there is one connector rather than two. The glass has an anti-fingerprint coating, there is black electromagnetic shielding on both sides, and the section gives a 2.25 mm finished stack with component height capped at 1.8 mm. This is a mechanical drawing, so the page is explicit about what is not in it: no resolution, interface, pin assignment, optical or environmental data.

This Victronix 3.5 inch 320x480 IPS TFT Module with CTP is a high-performance 3.5 inch IPS TFT LCD module with integrated capacitive touch panel (CTP), designed and manufactured by Victronix Tecenstar. The Victronix 3.5inch TFT module combines a 320×480 pixels resolution display and a 16.7M full-color display with IPS technology, it ensures crisp visuals optimized for a full 80° viewing angle viewing angle. As a professional TFT module manufacturer and supplier in China, this Victronix 3.5inch TFT Module uses ILI9488 display controller and GT911 touch controller support RGB interface and I²C touch communication to meet customers' requirements.

The Victronix 10.1-inch TFT LCD module pairs a 1024 x 600 widescreen resolution with a normally black LCD cell and a compact 40-pin interface, making it a practical fit for HMIs, control panels and embedded terminals that need more screen area than a 7-inch part without jumping to the cost and power of a large-format display. Normally black means each pixel blocks light when unpowered, so the panel rests at black rather than white — better contrast in dark UI states, no bright glow at the panel edges, and a fail-safe appearance if drive is lost.