China 4.3 inch capacitive touch display Manufacturer, Supplier, Factory
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of 4.3 inch capacitive touch display,4.3 inch 480x272 TFT LCD module,480x272 RGB TFT display module,4.3 inch TFT LCD with touch screen,small HMI display module 4.3 inch, We have been sincerely wanting forward to cooperate with consumers all over the earth. We feel we can easily satisfy with you. We also warmly welcome buyers to visit our manufacturing unit and purchase our products and solutions.
4.3 inch capacitive touch display, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, be sure to feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our merchandise, make sure you feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.
Related Products
Hot Products
7.0 Inch 800x480 High Brightness Wide Temperature TFT LCD Module 1000 cd/m2 LVDS - VXT700WHA-04
Victronix VXT700WHA-04: a high brightness wide temperature 7.0-inch 800 x 480 TFT LCD module, and two numbers define it. It delivers 1000 cd/m2 typical surface luminance from a 27-LED backlight at 27 V and 180 mA for the stated 4.86 W, putting it in daylight-readable territory, and it carries an operating range of -30 to +85 C with storage at -40 to +90 C. Driven by HX5281 over LVDS on a 40-pin 0.5 mm Hirose FH52-40S-0.5SH connector, it is transmissive and normally black with an ALL viewing direction, 16.7M colours, contrast 800 minimum and 1400 typical, response 25 ms typical and 35 ms maximum, uniformity 80 per cent minimum. ESD is the strongest in the range at 8 kV contact and 15 kV air. Brightness is stated at 1000-1100cd/m2.
4.3 Inch 480x800 Portrait TFT LCD Module RGB888 - VXT430MBVS-03
The VXT430MBVS-03 is a 4.3-inch TFT LCD module with 480 x 800 pixels in portrait. The active area of 56.16 x 93.60 mm is taller than it is wide by an exact 5:3, matching the pixel count, and the pitch works out to 0.117 mm on both axes - square, so circles and dial scales need no correction. Pixel count is 384,000, identical to an 800 x 480 landscape panel: a portrait interface is a transposition of what you already have, and the frame buffer is the same 750 KB at RGB565. One detail saves a component. Logic IO runs from a separate 1.8 V rail, and with VIH at 0.7 IOVCC a 1.8 V host drives it directly - no level shifters, which is not the case on the 3.3 V IO modules elsewhere in this size. Images travel over 24-bit RGB with a real data-enable line, and the driver is configured over a 3-line serial interface, so both paths are on the one 45-pin FPC. Contrast carries a stated 700 minimum against 1000 typical, uniformity 80% minimum, and viewing angle 85 degrees in all four directions with no preferred orientation.
10.1 Inch 1280x800 MIPI TFT LCD Module 2.9mm Without Touch - VXTA10BXH-01
The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.
7 Inch G+G Capacitive Touch Panel for 1024x600 Displays - CTP-T700GI-11
The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.
10.1 Inch Capacitive Touch TFT LCD Module
The VXT101BAHA-02C combines a 10.1 inch color TFT LCD with 5-point capacitive touch. Wide viewing angles, LVDS display input and USB or I²C touch interfaces support integration into embedded terminals and equipment control panels.
3.5" 320x240 Anti-Glare TFT LCD Module Wide Temperature - VXT350HQS-01X-W
The VXT350HQS-01X-W is a 3.5-inch TFT LCD module with 320x240 QVGA resolution and an anti-glare top polarizer — the only module in our range that specifies one. Combined with all-direction viewing and no grayscale inversion, it stays readable wherever the operator stands and wherever the light comes from, without spending brightness or backlight life on the problem. Rated -30 to +85°C, with 24-bit RGB for video and a separate SPI channel for configuration.
- Related Blog
- Reviews
