China 5 inch LCD panel Manufacturer, Supplier, Factory

We've got a highly efficient group to deal with inquiries from shoppers. Our purpose is ""100% client fulfillment by our product high-quality, price tag & our staff service"" and enjoy a superb reputation amongst clientele. With quite a few factories, we will provide a wide variety of 5 inch LCD panel,5 inch TFT LCD module,5 inch TFT display,5 inch LCD display module,5 inch TFT LCD panel, We've a big inventory to fulfill our customer's needs and needs.
5 inch LCD panel, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly products and solutions, reuse on the solution. We have Updated our catalog, which introduces our organization. n detail and covers the primary products we deliver at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.

Hot Products

  • 3.5 Inch 320x240 TFT LCD Module with Resistive Touch 18-Bit RGB - VXT350LQZ-01P

    3.5 Inch 320x240 TFT LCD Module with Resistive Touch 18-Bit RGB - VXT350LQZ-01P

    The VXT350LQZ-01P is a 3.5-inch 320 x 240 QVGA TFT LCD module with a 4-wire resistive touch panel, and the touch specification is the reason to look at it. Section 6 publishes what almost nothing in this size does: linearity of +/-1.5% after environmental and life testing, terminal resistance per axis, insulation resistance of 20 megohms minimum, response time under 10 ms, light transparency of 78% minimum, operation force of 80 gf typical, surface hardness of 3H minimum, 100,000 pen sliding cycles and 1,000,000 hitting cycles - with the test conditions for each. Two other figures are unusually trustworthy. Brightness carries both a floor and a ceiling, 280 minimum and 420 maximum around the 350 typical, so you can see the production spread as well as the worst case.The viewing angles are the narrowest in our range at 25 degrees typical on one horizontal side and 45 everywhere else, and while the specification states a 6 o'clock viewing direction, it is the horizontal pair that is asymmetric rather than the vertical one - so confirm the orientation with us and expect a narrow cone.
  • 10.1 Inch 1280x800 IPS TFT LCD Module with Capacitive Touch MIPI - VXTA10BXH-01C

    10.1 Inch 1280x800 IPS TFT LCD Module with Capacitive Touch MIPI - VXTA10BXH-01C

    The VXTA10BXH-01C is a 10.1-inch 1280x800 TFT with an integrated capacitive touch panel, driven over 4-lane MIPI DSI. Against our 10.4-inch 800x600 module it carries 2.1 times the pixels through 35% fewer pins — 39 instead of 60, and 32 functional instead of 43 — because four differential pairs move the whole image. Touch is on the module with an FT5426, so there is no separate flex to route. The backlight has PWM in and PWM out, so dimming is handled on the module rather than in your firmware. It is 16:10 at 150 PPI, anti-glare, with 80° viewing in all four directions and no gray scale inversion — together the signature of an IPS cell. Contrast is 700 minimum. The document has real problems, listed here: an active-area figure that does not reconcile, a touch controller with no I2C pins, and a brightness figure with no minimum.
  • 1.19 Inch 390x390 Round AMOLED Display Module MIPI SPI - VXO-119AMA-044

    1.19 Inch 390x390 Round AMOLED Display Module MIPI SPI - VXO-119AMA-044

    The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.
  • 3.5 Inch 240x320 Transflective Sunlight Readable TFT LCD Module - VXT350FPQI-01

    3.5 Inch 240x320 Transflective Sunlight Readable TFT LCD Module - VXT350FPQI-01

    The VXT350FPQI-01 is a transflective, sunlight readable 3.5-inch TFT module for equipment that moves between indoor and outdoor light. Outdoors it reads by reflected light, and the backlight can be switched off entirely rather than merely dimmed, removing the largest load in the module. It is the third transflective panel in our range and the only one you can drive over a 3-wire SPI from an ordinary microcontroller — 240x320 portrait, square pixels, ILI9341V, 0.384 W backlight. Rated -20 to +70°C with ±8 kV air ESD.
  • 4.3 Inch 480x272 RGB888 TFT LCD Module 50000-Hour Backlight - VXT430MPSA-16

    4.3 Inch 480x272 RGB888 TFT LCD Module 50000-Hour Backlight - VXT430MPSA-16

    The VXT430MPSA-16 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, built around a backlight rated for 50,000 hours — the longest in our range and roughly two and a half times the 20,000-hour life of our high-brightness 4.3-inch module. Sixteen LEDs share the load across eight series pairs, which is why it lasts. It ships without touch, so you fit your own or none at all. Rated -30 to +80°C for panel and control equipment that runs continuously.
  • 7 Inch G+G Capacitive Touch Panel with FT5426 - CTP-T700IXN-06C

    7 Inch G+G Capacitive Touch Panel with FT5426 - CTP-T700IXN-06C

    The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept