China 7 inch 800x480 TFT LCD module Manufacturer, Supplier, Factory

This Victronix 2.7 inch 240x320 TFT Module is a compact 2.7 inch TFT LCD module engineered for reliable performance in demanding applications. Featuring a sharp 240×(RGB)×320 resolution across a 40.5×54.0mm active area, this transflective display delivers vibrant 262K-color visuals with exceptional clarity.

The VXT350MLH-03P is a 3.5-inch 320 x 240 TFT LCD module with a 4-wire resistive touch panel, and resistive sensing works with gloves, wet hands or a stylus. The brightness 200 cd/m2 minimum with the touch panel fitted, contrast 300 minimum and NTSC 50% minimum - and because brightness is also published without the touch panel at 300 cd/m2

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and developed several models. We offer a customized service to meet the needs of our customers. This Victronix 10.4 inch 800×600 TFT Module is a high-performance 10.4 inch 800x600 TFT Module engineered for demanding environments. Featuring an 800×600 RGB resolution and supporting 262K colors, this display delivers crisp, vibrant visuals with wide viewing angles (70° at 3/6/9 o’clock, 60° at 12 o’clock).

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The CTP-T700GF-05 is a 7-inch capacitive touch panel in G+G construction with ten-point touch on an eight-pin FPC — the smallest connector in our range, and the only panel whose pin-out runs cleanly from ground and supply through I2C, reset and interrupt without empty positions in between. It uses an FT5446 controller and reaches ten points on a 0.7 mm cover glass, so multi-user operation does not cost you thickness. Suited to industrial HMI, portable terminals, collaborative interfaces and compact enclosures.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.