China 800x1280 TFT display Manufacturer, Supplier, Factory

Victronix 5.5 inch 1080p TFT Module is a high-quality 5.5 inch TFT LCD module engineered by Victronix Tecenstar for industrial, medical, and embedded systems. It features a resolution of 1080×1920 pixels, a 24-bit RGB interface, and HX8399C driver IC, making it ideal for industrial controls, medical devices, portable electronics, and advanced embedded systems.

The VXT397IWI-01P is a 3.97-inch 480 x 800 portrait TFT LCD module with a 4-wire resistive touch panel, and the touch is what distinguishes it from the other 480 x 800 panel in this size.Resistive sensing responds to pressure rather than to a finger's conductivity, so it works with gloves, wet hands, a stylus or a tool tip, which is why it is still the choice for industrial and medical equipment. The optical table is also unusually well specified: luminance carries a stated minimum of 240 and a stated maximum of 420 alongside the 300 typical, and contrast carries a 300 minimum, so there are figures you can hold us to at incoming inspection - which is not the case on several modules in this size. Two things need settling before you commit. This is a TN panel: the specification states a 6 o'clock viewing direction, grey-scale inversion at 12 o'clock, and vertical viewing angles of 50 degrees one way and 25 the other, so mounting orientation has a right answer - if your product is handheld and the orientation is not under your control, the IPS panel also in this size is the better buy.

The VXT430BPSA-04 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, supplied without touch. It shares its entire electrical and mechanical platform with our VXT430MPSA-16 and differs in one figure: a 20,000-hour backlight instead of 50,000. That makes it the choice where a display can be serviced easily — supervised indoor equipment, machine panels, instruments — rather than unattended installations where a service visit costs more than the panel. Rated -30 to +80°C.

The VXT101MBAE-01ND is a 10.1-inch TFT LCD module with 1024x600 widescreen resolution and a true 24-bit RGB interface driven by EK79001 and EK73215 controllers. It is the only module in our range with a 12 o'clock viewing direction rather than all-round, so it is built to be read from above and mounted accordingly. A 42-LED backlight and -20 to +70°C operation suit industrial HMIs, control panels, POS and kiosk terminals, and medical carts.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.