China Capacitive touch TFT LCD Manufacturer, Supplier, Factory

This Victronix 3.97 inch 480x800 Resistive Touch TFT Module is a high-performance 3.97 inch TFT LCD module designed by Victronix for industrial, medical, and embedded systems. It has an active area (51.84×86.40 mm) with a sharp 480×(RGB)×800 resolution (pixel pitch: 0.108×0.108 mm). Features a bright 300 cd/m² (typ.) anti-glare transflective panel with a high 500:1 contrast ratio (typ.) and optimized 6 o'clock viewing direction. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.97 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 7 inch 800x1280 MIPI IPS TFT Module is a high-resolution 7-inch TFT LCD module engineered for demanding environments. Featuring an 800×(RGB) ×1280 pixel resolution and a crisp 150.72 × 94.2 mm active area, this display delivers exceptional visual clarity with a pixel density of 0.11775 mm. As a professional TFT module manufacturer and supplier in China, this Victronix 7 inch TFT Module is strictly compliant with the ROHS environmental standards to provide superior application performance. We offer a customized service to meet the needs of our customers.

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

The CTP-T700GF-05 is a 7-inch capacitive touch panel in G+G construction with ten-point touch on an eight-pin FPC — the smallest connector in our range, and the only panel whose pin-out runs cleanly from ground and supply through I2C, reset and interrupt without empty positions in between. It uses an FT5446 controller and reaches ten points on a 0.7 mm cover glass, so multi-user operation does not cost you thickness. Suited to industrial HMI, portable terminals, collaborative interfaces and compact enclosures.

The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.

The VXT101BAHA-02C combines a 10.1 inch color TFT LCD with 5-point capacitive touch. Wide viewing angles, LVDS display input and USB or I²C touch interfaces support integration into embedded terminals and equipment control panels.