China FT6336 capacitive touch panel Manufacturer, Supplier, Factory

This Victronix 3.5 inch 320*240 TN Type TFT Module is a high-performance 3.5 inch TFT LCD module engineered for industrial embedded systems. It features a transmissive TN-type panel with 320×240 RGB pixels, and delivers sharp 16.7M-color visuals across a 70.08×52.56mm active area. Its compact design (76.90×63.90×3.15mm) integrates seamlessly into space-constrained applications.

The VXT430INS-15 is a 4.3-inch 480 x 272 TFT LCD module built for products that get knocked about. Its reliability programme runs ten tests at 240 hours and includes the three most often missing at this size - 60 G mechanical shock on six faces, 6 hours of vibration across three axes, and ESD at 8 kV air and 4 kV contact - which is what makes it a panel for vehicles, mobile equipment and machine control rather than for a bench instrument. Brightness is quoted with a floor you can enforce at incoming inspection and a ceiling that shows the spread across a shipment, and both are rare at any price. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock and unequal vertical angles, so do not mount it where the operator looks up at it - if your orientation is not under your control, an all-direction panel in this size is the better buy and we will say so. And the timing chapter is published only as diagrams, so ask us for the clock frequency and the porch values before you configure a controller.

The VXTA10BXH-01 is the display-only version of our 10.1-inch 1280x800 MIPI panel. It shares the active area, resolution, 39-pin connector and 4-lane MIPI interface with the VXTA10BXH-01C but omits the capacitive touch layer — and what that buys is the point: 2.9 mm thick against 5.15 mm, and an outline of 229.6 x 149.3 mm against 238.60 x 160.6 mm. If touch is handled elsewhere or not needed, you are not paying for a layer you will not use. It is also the version with complete documentation: a luminance minimum of 200 cd/m², a ten-item reliability programme citing IEC and GB standards, an MTBF of 50,000 hours, and inspection to MIL-STD-105E at AQL 0.65. It runs -20°C to +70°C, ten degrees wider than the touch version, and states the active area as 216.96 x 135.6 mm, confirming the correction we derived on the sibling.

The VXT174MYKH-01 is the smallest TFT module we make and the second transflective one in our range. At 1.74 inches in a 40.77 × 36.20 × 2.40 mm footprint, it is sized for something worn or carried — and transflective means the backlight can be switched off entirely in daylight, not merely dimmed. With a 3.0 V backlight needing no boost converter and a 60 KB frame buffer needing no external RAM, three power savings stack in one display. Rated -30 to +70°C.

The Victronix 10.1-inch TFT LCD module pairs a 1024 x 600 widescreen resolution with a normally black LCD cell and a compact 40-pin interface, making it a practical fit for HMIs, control panels and embedded terminals that need more screen area than a 7-inch part without jumping to the cost and power of a large-format display. Normally black means each pixel blocks light when unpowered, so the panel rests at black rather than white — better contrast in dark UI states, no bright glow at the panel edges, and a fail-safe appearance if drive is lost.

The Victronix VXTL50BJZ-01 is a 21.5-inch TFT LCD module with a native 1920 x 1080 (FHD) resolution, a 16:9 aspect ratio and a 0.24795 mm pixel pitch, delivering sharp Full HD images. It provides 500 cd/m² typical brightness and 1000:1 typical contrast ratio, so content stays clear and consistent across a room. Video is carried by a dual-channel LVDS interface. An anti-glare top polarizer reduces reflections under indoor lighting.It suits digital signage, indoor kiosks, POS and self-checkout terminals, monitors, control rooms and light industrial HMIs. Touch panels, cover glass, HDMI/VGA/DP driver boards and higher-brightness options are available on request.