China High contrast VA display Manufacturer, Supplier, Factory

This Victronix Segment LCD Module is a high-performance monochrome dot matrix Liquid Crystal Display Module (LCM) designed by VICTRONIX for reliable embedded applications. Featuring a transmissive HTN (High-Twist Nematic) display with positive image and 6 o’clock viewing direction, this module delivers clear visuals in a compact form factor. Integrated with a blue LED backlight (VF=3.1V±0.2V, IF=30mA), it ensures excellent readability in diverse lighting conditions. As a professional manufacturer and supplier of TFT modules in China, Victronix VA Segment LCD Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430CNH-07C is the capacitive-touch version of our 4.3-inch 480 x 272 panel, and the way it is put together is the reason to look at it. Touch is not squeezed onto the display FPC - it has its own 10-pin connector carrying I2C, reset and interrupt, so the 40-pin display bus stays clean and the two can be routed independently. The mechanical drawing documents the touch panel to a tenth of a millimetre, and the numbers show the touch view area sitting 0.40 mm outside the LCD active area on every side, so there is no dead band at the edges of the screen. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock, and vertical viewing angles of 45 degrees one way and 60 the other, so mounting orientation has a right answer - and if your product is handheld or portable and the orientation is not under your control, a panel with no preferred direction is the better buy.

The VXT500BKI-01F is a 5.0-inch TFT LCD module with 720 x 1280 pixels in portrait - HD resolution on a five-inch panel, and one of the highest pixel densities in our range. The pixels are square: 0.08625 mm on both axes, which is exactly what 62.1 mm over 720 pixels and 110.4 mm over 1280 pixels both give, and the shape is an exact 16:9 turned on its side. Brightness is 680 cd/m2 minimum against 850 typical, contrast 1000:1 minimum, and viewing angle 70 degrees minimum in all four directions with no preferred orientation, so how you mount it is a mechanical decision rather than an optical one. Touch is five-point capacitive in a G+G stack rated at 6H and 85% transparency, on its own 7-pin I2C connector. The display runs four MIPI lanes from a single 2.8 V rail, and both the logic current and the backlight power are published, so the total draw can be worked out at roughly 0.93 W.

The CTP-VX185A2132 is an 18.5-inch capacitive touch panel in G+G construction, and the only panel in our range with a USB interface — so it works the moment you plug it in, with the multi-touch HID driver already in Windows, Linux, macOS and Android. There is no I2C address to configure and no level shifting to worry about. Ten-point touch, a 409.8 x 230.4 mm active area matched to 1366x768, powered from 5 V. Built for kiosks, information displays, POS and interactive screens.

The CTP-VX215A5698-GG is a 21.5-inch capacitive touch panel in G+G construction, sized for 1920x1080 displays and for the enclosures, VESA mounts and kiosk cabinets already built around that format. It adds touch to an existing panel instead of replacing the whole assembly. Transmittance is at least 85% with ≥6H surface hardness, response is ≤12 ms, and it runs from 2.8 to 3.3 V. Suited to kiosks, POS, industrial HMI and education displays, and to retrofitting touch onto existing 21.5-inch hardware.

The VXT084XJWA-01 is an 8.4 inch XGA TFT LCD module with a 4:3 viewing area for instruments and monitoring interfaces. Wide viewing angles, adjustable backlighting and an extended operating temperature range support equipment integration.