China landscape TFT display Manufacturer, Supplier, Factory

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix Replace HTN Segment Varitronix LCD Module is a high-performance monochrome dot-matrix Liquid Crystal Display (LCM) module for industrial and embedded applications. Featuring a transflective HTN (High-Twist Nematic) panel with a positive display and optimal 6 o’clock viewing direction, this module delivers clear visibility across diverse lighting conditions.

Victronix is a professional TFT module manufacturer and supplier based in China. With 18 years of experience in this field, we have developed a variety of models. In addition to our standard products, we also offer customized services to meet our customers' specific needs. This Victronix 7 inch IPS Resistive Touch TFT Module is a high-quality 7 inch TFT-LCD module integrating IPS technology and resistive touch functionality. Designed for demanding environments, it features an 800 × 480 (WVGA) resolution, 16.7M color depth, and a wide 152.4 × 91.44 mm active area. Compliant with RoHS standards, this module combines exceptional optical performance with industrial-grade reliability.

The VXT430MBVS-03 is a 4.3-inch TFT LCD module with 480 x 800 pixels in portrait. The active area of 56.16 x 93.60 mm is taller than it is wide by an exact 5:3, matching the pixel count, and the pitch works out to 0.117 mm on both axes - square, so circles and dial scales need no correction. Pixel count is 384,000, identical to an 800 x 480 landscape panel: a portrait interface is a transposition of what you already have, and the frame buffer is the same 750 KB at RGB565. One detail saves a component. Logic IO runs from a separate 1.8 V rail, and with VIH at 0.7 IOVCC a 1.8 V host drives it directly - no level shifters, which is not the case on the 3.3 V IO modules elsewhere in this size. Images travel over 24-bit RGB with a real data-enable line, and the driver is configured over a 3-line serial interface, so both paths are on the one 45-pin FPC. Contrast carries a stated 700 minimum against 1000 typical, uniformity 80% minimum, and viewing angle 85 degrees in all four directions with no preferred orientation.

The VXT430GWH-02 is a 4.3-inch IPS TFT module in portrait orientation: 480 x 800 pixels over an active area of 56.16 x 93.60 mm, taller than wide, with a diagonal of 4.2975 inches. It is the only portrait module and the only IPS module in our 4.3-inch range. Being IPS means viewing angle is 80° typical in all four directions with no preferred direction and no gray scale inversion to design around — decide orientation on mechanical grounds alone. Pixel pitch is 0.117 mm square, giving 217 PPI, so small text stays legible and circular graphics need no correction. It runs 24-bit RGB over a 42-pin connector driven by an HX8369A, with a serial port on the same connector for configuration. Brightness is 310 minimum, 350 typical and 390 maximum cd/m² — the lowest in the family and intended for indoor and handheld use, published as a complete range you can design and inspect against. At 2.15 mm it is also the thinnest 4.3-inch module we offer.

The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.

The Victronix VXT700QAEW-01C arrives as a finished touch assembly rather than a bare panel. A projected-capacitive sensor, a 0.70 mm cover lens and the display cell are built into one bonded stack — G+G construction, 6H surface hardness, at least 85% light transmittance — so there is no second touch part to source, no alignment step, and no bonding process in your build. Luminance is 850 cd/m² typical with an 80/80/80/80 viewing angle, video comes in over 40-pin LVDS driven by EK79001HN and EK73215BCGA, and touch is managed by an ILI2130 controller. Rated -30°C to +85°C.