China MIPI DSI TFT module Manufacturer, Supplier, Factory

This Victronix 2.4 inch 240x320 TFT Module is a high-quality 2.4 inch TFT LCD module engineered for reliability in demanding industrial and embedded systems. Featuring a QVGA-like resolution (240 × 320 pixels) with 65K colors, this transmissive display delivers crisp visuals with an active area of 36.72 × 48.96 mm and a pixel pitch of 0.153 mm. As a professional manufacturer and supplier of TFT modules in China, Victronix 2.4 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT430MBVS-03 is a 4.3-inch TFT LCD module with 480 x 800 pixels in portrait. The active area of 56.16 x 93.60 mm is taller than it is wide by an exact 5:3, matching the pixel count, and the pitch works out to 0.117 mm on both axes - square, so circles and dial scales need no correction. Pixel count is 384,000, identical to an 800 x 480 landscape panel: a portrait interface is a transposition of what you already have, and the frame buffer is the same 750 KB at RGB565. One detail saves a component. Logic IO runs from a separate 1.8 V rail, and with VIH at 0.7 IOVCC a 1.8 V host drives it directly - no level shifters, which is not the case on the 3.3 V IO modules elsewhere in this size. Images travel over 24-bit RGB with a real data-enable line, and the driver is configured over a 3-line serial interface, so both paths are on the one 45-pin FPC. Contrast carries a stated 700 minimum against 1000 typical, uniformity 80% minimum, and viewing angle 85 degrees in all four directions with no preferred orientation.

The VXT400MCCA-01 is a round TFT module: 720 x 720 pixels in a square array with a circular active area of 101.52 mm diameter. It is the largest round module we offer — the others are 1.6 and 2.1 inches — and at 720 x 720 the highest resolution, at 180 PPI. The round shape suits products whose face is already circular: instrument gauges, thermostats, rotary controls, speaker and hub covers, and automotive clusters. Designers should know that the circle covers only 78.5% of the pixel array, so the four corners are invisible and content must stay within about 45 mm of centre. It runs MIPI DSI with four data lanes, and the capacitive touch interface sits on the same 30-pin connector — interrupt, I2C, reset and two dedicated supply pins — so one flex and one socket cover display and touch. Separate 1.8 V and 3.3 V rails mean 1.8 V host logic connects directly with no level shifting. The module is 2.09 mm thick, the thinnest in this size class.

The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.

The VXT174MYKH-01 is the smallest TFT module we make and the second transflective one in our range. At 1.74 inches in a 40.77 × 36.20 × 2.40 mm footprint, it is sized for something worn or carried — and transflective means the backlight can be switched off entirely in daylight, not merely dimmed. With a 3.0 V backlight needing no boost converter and a 60 KB frame buffer needing no external RAM, three power savings stack in one display. Rated -30 to +70°C.

The CTP-T700IXN-06C is a 7-inch capacitive touch panel in G+G construction, and the most completely specified one we publish — outline, view area, drive IC, interface, I2C address, touch-point count and connector are all stated, so you can design with it straight away. It uses an FT5426 controller over I2C, supports five touch points, and is rated ≥7H. The gasket carries double-side tape, so it fits to a display without bonding equipment. Built for industrial HMI, control panels, portable terminals and retrofit work.