China sunlight readable 7 inch touch module Manufacturer, Supplier, Factory

This Victronix Replace HTN Segment Varitronix LCD Module is a high-performance monochrome dot-matrix Liquid Crystal Display (LCM) module for industrial and embedded applications. Featuring a transflective HTN (High-Twist Nematic) panel with a positive display and optimal 6 o’clock viewing direction, this module delivers clear visibility across diverse lighting conditions.

This Victronix 10.1 inch 1280x800 HDMI TFT Module is a high-performance 10.1 inch TFT-LCD module for superior visual clarity and responsive interaction. Designed with a crisp 1280×800 resolution, this module delivers sharp imagery and clear text, ideal for industrial control panels, embedded systems, digital signage, and interactive kiosks.

The VXT350LQZ-01P is a 3.5-inch 320 x 240 QVGA TFT LCD module with a 4-wire resistive touch panel, and the touch specification is the reason to look at it. Section 6 publishes what almost nothing in this size does: linearity of +/-1.5% after environmental and life testing, terminal resistance per axis, insulation resistance of 20 megohms minimum, response time under 10 ms, light transparency of 78% minimum, operation force of 80 gf typical, surface hardness of 3H minimum, 100,000 pen sliding cycles and 1,000,000 hitting cycles - with the test conditions for each. Two other figures are unusually trustworthy. Brightness carries both a floor and a ceiling, 280 minimum and 420 maximum around the 350 typical, so you can see the production spread as well as the worst case.The viewing angles are the narrowest in our range at 25 degrees typical on one horizontal side and 45 everywhere else, and while the specification states a 6 o'clock viewing direction, it is the horizontal pair that is asymmetric rather than the vertical one - so confirm the orientation with us and expect a narrow cone.

The VXT101MBFH-01 is a 10.1-inch TFT LCD module with 1920 x 1200 pixels — WUXGA, the interface is dual-channel LVDS and contrast carries a stated 700 minimum against 800 typical. Brightness is 300 cd/m² typical with no stated minimum.

The VXT430MPSA-16 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, built around a backlight rated for 50,000 hours — the longest in our range and roughly two and a half times the 20,000-hour life of our high-brightness 4.3-inch module. Sixteen LEDs share the load across eight series pairs, which is why it lasts. It ships without touch, so you fit your own or none at all. Rated -30 to +80°C for panel and control equipment that runs continuously.

The CTP-T700GA-51 is a 7-inch capacitive touch panel in G+G construction, and the only panel in our range with true ten-point multi-touch — the other three 7-inch panels all stop at five. That matters for two-person operation, multi-finger gestures and collaborative interfaces. An Atmel maXTouch 641T controller drives a 16 by 28 channel grid, behind a 1.1 mm cover glass rated at 6H with impact energy of at least 0.35 J. Suited to collaborative terminals, education displays, industrial HMI and kiosks.