China 1024x600 touch screen TFT module Manufacturer, Supplier, Factory

This Victronix 2.2 inch 240x320 ILI9341V TFT Module is a high-quality 2.2 inch TFT LCD module designed for industrial, medical, and consumer electronics requiring vivid color performance and reliable operation. Featuring a 240 × 320-pixel resolution and 262K color depth, it delivers sharp visuals with an active display area of 33.84 × 45.12 mm (diagonal: 55.8 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 1.3 inch 240x240 Round IPS TFT Module is a high-quality 1.3 inch TFT display engineered for demanding applications. Featuring a 240×240 RGB IPS panel with exceptional 450 cd/m² brightness and 1100:1 contrast ratio, this module delivers vivid visuals with consistent 85° viewing angles in all directions. As a professional manufacturer and supplier of TFT modules in China, Victronix 1.3 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT500TWH-01 is a 5.0-inch TFT LCD module with 800 x 480 pixels in a landscape 5:3 shape, luminance has a stated minimum of 180 against 250 typical, uniformity a minimum of 75%, and the viewing angle a floor in every direction.The interface is a plain 24-bit parallel RGB on a 40-pin FPC from a single 3.3 V rail, which a microcontroller with an LCD controller drives directly, and the frame buffer is a manageable 750 KB at RGB565.

The VXT104QXHA-02-B is a 10.4-inch TFT LCD module with 1024 x 768 XGA resolution and an HDMI input — the first HDMI module in our range, and the difference is the point. Every other module we sell is a component you have to drive: your processor needs the right peripheral, your firmware needs an initialisation sequence, your board needs a frame buffer, and your power design needs the sequencing right. This one includes the driver PCBA, so it takes HDMI from a single-board computer, an industrial PC, a media player or a laptop and shows a picture. There is no display interface to design and no 1.5 MB of frame memory to find in your host. It is also the easy answer when an old XGA panel fails: you do not have to reproduce the original interface, just feed it HDMI from the new computer. Power comes from a 12 V DC jack or 5 V over the HDMI connector, with the jack recommended because no input current is published. Brightness is 600 cd/m² with contrast at 600 minimum and 800 typical, viewing angle 80° in all four directions, and pixels square to within 0.002% so circles need no correction. We are equally plain about what the document does not settle: no LED forward voltage or backlight power, no input current, brightness and viewing angle carry typical values with no minimums, the supported HDMI video modes are not listed, and the outline drawing is missing from the file.

The VXT240FBQS-01 is a transflective, sunlight readable 2.4-inch TFT module — and the only one in our range that pairs transflective construction with an anti-glare polarizer. Transflective gives it a reflective path so it reads by ambient light outdoors with the backlight off; anti-glare stops the surface mirroring the sky. It also posts 1500:1 contrast, higher than any transmissive panel we make. The display is 240x320 portrait with square pixels, driven by an ST7789T3 over an 8- or 16-bit MCU bus selected by one pin. Rated -20 to +70°C.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.