China thin TFT LCD module Manufacturer, Supplier, Factory

This Victronix 1.3 inch 240x240 TFT Module is a high-quality 1.3 inch diagonal active area (23.4 mm × 23.4 mm) with 240×240 RGB resolution and a fine pixel pitch of 0.0975mm, delivering crisp visuals in a space-efficient footprint (26.16 mm × 29.13 mm × 2.30 mm).

This Victronix 3.5 inch Tianma Panel TFT Module offers 380 cd/m² brightness, 500:1 contrast ratio, and viewing angles of 70° horizontal / 60° vertical ensure vivid imagery. Secondly, the device supports both 24-bit RGB parallel and SPI control. Additionally, it features a 6-die white LED backlight with a lifespan of 30,000 to 50,000 hours, ensuring reliable performance in various industrial applications. Besides, it meets RoHS standards and passes rigorous reliability tests (thermal shock, humidity, storage) to operate flawlessly in extreme temperatures (-20°C to +70°C) and withstand harsh storage conditions (-30°C to +80°C). This Victronix 3.5 inch TFT Module is suitable for video door phone, smart home, GPS, camcorder, digital camera application, industrial equipment device, and other electronic products that require high-quality flat panel displays and excellent visual effects.

The VXT350MLH-03P is a 3.5-inch 320 x 240 TFT LCD module with a 4-wire resistive touch panel, and resistive sensing works with gloves, wet hands or a stylus. The brightness 200 cd/m2 minimum with the touch panel fitted, contrast 300 minimum and NTSC 50% minimum - and because brightness is also published without the touch panel at 300 cd/m2

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.

The VXT500TWH-01 is a 5.0-inch TFT LCD module with 800 x 480 pixels in a landscape 5:3 shape, luminance has a stated minimum of 180 against 250 typical, uniformity a minimum of 75%, and the viewing angle a floor in every direction.The interface is a plain 24-bit parallel RGB on a 40-pin FPC from a single 3.3 V rail, which a microcontroller with an LCD controller drives directly, and the frame buffer is a manageable 750 KB at RGB565.

The CTP-T700GI-11 is a 7-inch capacitive touch panel in G+G construction with a genuinely compact 164 x 99 mm outline — only about 4.5 mm of border on each side, so it fits the display rather than replacing the front panel. Its view area measures 155.08 x 86.92 mm, a true 16:9 shape matched to 7-inch 1024x600 screens, with a 1.1 mm toughened cover glass. An ILI2511 controller runs five-point touch over I2C. Suited to industrial HMI, control panels, portable terminals and displays with a fixed bezel.