China VA 液晶屏 Manufacturer, Supplier, Factory

Victronix 4.3 inch 480×272 Wide Temperature TFT Module offers 1000 cd/m² brightness, 1000:1 contrast ratio, an 80-degree viewing angle in all directions, and 80% uniformity ensure vivid imagery. Secondly, it supports a 40-pin RGB888 parallel input interface and a 16-LED white backlight with a lifetime of 50,000 hours, ensuring its long-term usability in various industrial applications. Besides, it complies with RoHS standards and successfully passes rigorous reliability tests, including thermal shock, humidity, and ESD protection up to 8kV air and 4kV contact. This product operates efficiently in extreme temperatures ranging from -30°C to +85°C and can withstand severe storage conditions from -40°C to +90°C. This 4.3 inch TFT module from Victronix is designed for Industrial HMIs & Control Systems, Automotive Dashboards/Diagnostic Tools, Medical Devices & Test Equipment, and Outdoor Kiosks & Portable Instruments.

This Victronix 5 inch Capacitive Touch TFT Module is a high-performance 5 inch TFT-LCD module integrating a capacitive touch panel (CTP), designed for industrial HMI, embedded systems, and interactive applications. Combining an 800 × 480 RGB pixel display, 16.7M color depth, and robust environmental compliance, this RoHS-certified module delivers exceptional clarity and reliability. As a professional manufacturer and supplier of TFT modules in China, Victronix 5 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 6.2 inch 800×480 TFT Module offers a typical brightness of 700 cd/m² and a contrast ratio of 600:1, ensuring excellent readability from various angles. Secondly, it integrates a backlight unit utilizing 18 white LEDs with a typical lifetime of 30,000 to 50,000 hours (to 50% initial brightness), ensuring clear visibility in all lighting conditions. Besides, it supports a 24-bit parallel RGB with DE/SYNC mode control interface and an ILI6123H + ILI5480 controller. In addition, it passes rigorous environmental testing, including thermal shock (-30°C ↔ +80°C cycles), humidity storage (60°C/90% RH), and mechanical vibration, ensuring it can operate seamlessly across an extended temperature range from -20°C to +70°C. This 6.2 inch TFT display by Victronix is commonly used in medical devices, vehicle displays, industrial control systems, and portable instrumentation where readability under varied lighting conditions is critical.

The VXT280CQI-02 is a 2.8-inch 240 x 320 portrait TFT LCD module on a 16-bit 8080 MCU bus,The colour depth is stated outright at 65K, which most specifications leave blank. The diagonal runs over rather than short: 43.20 x 57.60 mm gives exactly 72.0000 mm, or 2.8346 inches against a nominal 2.8, a margin of 1.2 per cent - the widest in this range. The backlight is four white LEDs in parallel, one anode and four cathode pins, at 3.2 V and 60 mA, which is 15 mA per LED against a 30 mA absolute maximum.

Victronix VXT350QHI-19: a 3.5 inch portrait TFT LCD module with 320x480 pixels and 262K colors over a 48.96 x 73.44 mm active area. All viewing direction with free grey-scale inversion and 80 degrees at 3, 6, 9 and 12 o'clock alike, so there is no wrong mounting orientation. RGB, MCU and SPI interfaces on one 50-pin FPC selected by IM0, IM1 and IM2, ILI9488 controller, VCI 2.8 V and IOVCC 1.8 V rails so 1.8 V logic drives it directly, 6-LED backlight, 2.25 mm thin, -20 to +70 C operating. For handheld instruments, portable monitors, smart home control panels, POS terminals, medical devices and industrial HMI.

The VXT430PNO-01 is a 4.3-inch TFT LCD module at 480 x 272, The specification states the recommended viewing direction as ALL and names the technology as MVA, gives 80 degrees in all four directions, and leaves the grey-scale inversion direction blank - three consistent signals that mean there is no wrong way to mount it. On a TN panel a preferred direction and an inversion direction are stated, and a unit mounted where the operator looks up at it can land on the wrong side; here that decision disappears. The frame buffer is 255 KB, small enough that a microcontroller with 512 KB of internal SRAM needs no external RAM at all. Luminance is 280 minimum against 350 typical and 420 maximum, so there is a floor to hold us to and a ceiling that shows the spread. The backlight is twelve LEDs in six series strings of two, at 19.2 V and 40 mA drawing 0.768 W, with 30,000 hours minimum life. Reliability runs nine tests at 240 hours including vibration, ESD and an MTBF of 50,000 hours. Two cautions.