China VXT700BAHA-01CA Manufacturer, Supplier, Factory

This Victronix 7 inch 1024x600 MIPI IPS Touch TFT Module is a high-performance 7 inch TFT-LCD module with integrated capacitive touch panel (CTP). Engineered for reliability in demanding environments, this module combines a BOE-sourced IPS panel with 1024 × 600 resolution and 16.7 million colors for vivid visuals and wide viewing angles (80° at Cr≥10 at all directions). As a professional manufacturer and supplier of TFT modules in China, Victronix 7 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

This Victronix 3.97 inch 480x800 Resistive Touch TFT Module is a high-performance 3.97 inch TFT LCD module designed by Victronix for industrial, medical, and embedded systems. It has an active area (51.84×86.40 mm) with a sharp 480×(RGB)×800 resolution (pixel pitch: 0.108×0.108 mm). Features a bright 300 cd/m² (typ.) anti-glare transflective panel with a high 500:1 contrast ratio (typ.) and optimized 6 o'clock viewing direction. As a professional manufacturer and supplier of TFT modules in China, Victronix 3.97 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT021MCSA-02 is a round TFT LCD module — the only round display in our range. Its 53.28 mm active diameter is 2.0976 inches, driven as a 480x480 array at 229 PPI. Built for smart watches: 230 µA sleep current, a 1.45 mm bezel, and 56.18 × 59.71 × 2.2 mm outline. Optics are specified with minimums, not just typicals — 530 cd/m² and 800:1 guaranteed, 600 and 1000:1 typical, with 80° viewing in all directions. Rated -20 to +70°C.

The VXT350HQS-01X-W is a 3.5-inch TFT LCD module with 320x240 QVGA resolution and an anti-glare top polarizer — the only module in our range that specifies one. Combined with all-direction viewing and no grayscale inversion, it stays readable wherever the operator stands and wherever the light comes from, without spending brightness or backlight life on the problem. Rated -30 to +85°C, with 24-bit RGB for video and a separate SPI channel for configuration.

The VXT101MBAE-01ND is a 10.1-inch TFT LCD module with 1024x600 widescreen resolution and a true 24-bit RGB interface driven by EK79001 and EK73215 controllers. It is the only module in our range with a 12 o'clock viewing direction rather than all-round, so it is built to be read from above and mounted accordingly. A 42-LED backlight and -20 to +70°C operation suit industrial HMIs, control panels, POS and kiosk terminals, and medical carts.

The Victronix VXT700SWHW-01 is rated to +85°C, and down to -30°C — a 15°C wider window at the top and 10°C at the bottom than the usual industrial range. That difference is what lets a display live in a sealed enclosure under a hot roof, next to a power stage, or in a vehicle parked in direct sun, without a heater or a fan. Helping it along is a genuinely low power draw: just 100 mA typical at 3.3 V, about 0.33 W for the panel logic, so the module adds little heat of its own to an already hot box. The 800 x 480 panel uses square 0.1905 mm pixels for undistorted graphics, connects over single-channel LVDS on a compact 20-pin I-PEX or JAE connector, and offers MODE (6/8-bit) and SC (scan direction) control pins plus a separate 6-pin backlight connector with BLEN enable and VPDIM PWM dimming.