China 10.1 inch 1024x600 TFT LCD module Manufacturer, Supplier, Factory

2.9 Inch Bar TFT Module VXT297BZS-01, its IPS technology provides consistent color and clarity across wide 80-degree viewing angle in all directions, 250 cd/m² typical brightness, and a high typical contrast ratio of 1000:1. Secondly, it supports versatile connectivity via 3-wire SPI + 18-bit RGB parallel interface (with DE/VSYNC/HSYNC control), driven by the integrated ST7701S controller. Besides, it integrates a 4-diode white LED array with 12V/20mA drive, offering 50,000-hour lifespan (50% brightness retention), which ensures long-term usage in various industrial applications. Our bar type TFT solution can be perfectly used in many applications like industrial, automotive, medical, home appliance and maritime, etc.

The VXT430HNS-01-W is a 4.3-inch transmissive TFT module with 480 x 272 resolution, an anti-glare polarizer, and an operating range of -30 to +85°C, without touch. Its most useful property only appears when you compare it with a sibling: it shares the mechanical envelope, connector and pin-out of the VXT430HWE-03-W, which is the same module at 800 x 480 — same outline, same 40-pin assignment, same contrast and viewing angle — with one third the frame buffer at 255 KB. That makes resolution a choice you can defer rather than a decision that locks your mechanics. Pixels are exactly square at 0.198 x 0.198 mm, so circles, dials and round indicators need no artwork correction. Brightness is given as 440 minimum, 550 typical and 660 maximum, with contrast at 640 minimum and 800 typical. Reliability covers ten tests including vibration and 60 G shock, with MTBF of 50,000 hours. Two gaps are stated plainly: logic supply current is not published, and storage temperature is not wider than operating.

The VXT021MCSA-02 is a round TFT LCD module — the only round display in our range. Its 53.28 mm active diameter is 2.0976 inches, driven as a 480x480 array at 229 PPI. Built for smart watches: 230 µA sleep current, a 1.45 mm bezel, and 56.18 × 59.71 × 2.2 mm outline. Optics are specified with minimums, not just typicals — 530 cd/m² and 800:1 guaranteed, 600 and 1000:1 typical, with 80° viewing in all directions. Rated -20 to +70°C.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT280GQSW-01 is a 2.8-inch wide temperature TFT LCD for compact equipment interfaces. A -30°C to +80°C operating range and selectable RGB, MCU or SPI communication modes give designers flexibility across different environments and host platforms.

The VXT430BPI-01ND is a 4.3-inch 480x272 industrial TFT LCD module with a standard RGB interface and ILI6485 controller. It delivers 16.7M colors, 300 cd/m2 brightness, a 700:1 contrast ratio and a 20 ms response time, backed by a 7S1P white LED backlight rated for 30,000 to 50,000 hours. Operating from -20°C to +70°C and RoHS compliant, it is built for industrial HMIs, automotive dashboards and medical monitoring devices. Custom FPC, touch panel and cover glass are available.