China 10.1 inch widescreen TFT display Manufacturer, Supplier, Factory

This Victronix 2.2 inch 240x320 ILI9341V TFT Module is a high-quality 2.2 inch TFT LCD module designed for industrial, medical, and consumer electronics requiring vivid color performance and reliable operation. Featuring a 240 × 320-pixel resolution and 262K color depth, it delivers sharp visuals with an active display area of 33.84 × 45.12 mm (diagonal: 55.8 mm). As a professional manufacturer and supplier of TFT modules in China, Victronix 2.2 inch TFT Module is fully compliant with ROHS environmental standards, ensuring superior application performance. We offer a customized service to meet the needs of our customers.

The VXT350EVV-01 puts 640 x 480 into 3.5 inches - 307,200 pixels at 232.0 PPI on square 0.1095 mm pixels, the sharpest 3.5-inch panel in this range. What makes it usable rather than just dense is that the optical figures come with floors: brightness 250, 320 and 440, contrast 600 minimum against 800 typical, uniformity 80 per cent minimum, and all four viewing angles identical at 75 minimum and 85 typical, which is what the ALL viewing direction promises.

The VXT430CNH-07C is the capacitive-touch version of our 4.3-inch 480 x 272 panel, and the way it is put together is the reason to look at it. Touch is not squeezed onto the display FPC - it has its own 10-pin connector carrying I2C, reset and interrupt, so the 40-pin display bus stays clean and the two can be routed independently. The mechanical drawing documents the touch panel to a tenth of a millimetre, and the numbers show the touch view area sitting 0.40 mm outside the LCD active area on every side, so there is no dead band at the edges of the screen. Two things decide whether it suits your product. It is a TN panel: the specification states a 12 o'clock viewing direction, grey-scale inversion at 6 o'clock, and vertical viewing angles of 45 degrees one way and 60 the other, so mounting orientation has a right answer - and if your product is handheld or portable and the orientation is not under your control, a panel with no preferred direction is the better buy.

The VXO-119AMA-044 is the first AMOLED module in our range, and that changes more than a specification line. Every other display we make is a TFT LCD with a backlight — an LED string, a driver, often a boost converter, and a brightness that fades. This panel has no backlight at all: each pixel makes its own light, so black is truly off. That gives 60,000:1 contrast, removes the largest power load in the module, and makes it thinner. It is a 1.19-inch round panel at 390x390 and 326 PPI, the sharpest we make, with four interface options — MIPI 2-lane, 3-wire SPI, 4-wire SPI and QAD-SPI — so you can bring it up on SPI and ship on MIPI. About 0.098 W at full white, 1 µA deep standby. RM69330, -20 to +70°C.

The VXT430MPSA-16 is a 4.3-inch TFT LCD module with 480x272 resolution and a true 24-bit RGB888 interface, built around a backlight rated for 50,000 hours — the longest in our range and roughly two and a half times the 20,000-hour life of our high-brightness 4.3-inch module. Sixteen LEDs share the load across eight series pairs, which is why it lasts. It ships without touch, so you fit your own or none at all. Rated -30 to +80°C for panel and control equipment that runs continuously.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.